Home > Pipe Supports > Beam Clamps > Fig B292 Beam Clamp with Eye Nut

Enlarge

Fig B292 Beam Clamp with Eye Nut

The figure B292 beam clamp w/weldless eye nut is used when welding to the structure is prohibited for supports and where some movement is expected. The clamping effect is produced by the “ice tong” action of the arms and is locked in place by the through bolt located just under the beam flange.

Products
Product Details
Dimensions & Loads
Installation Drawings

Dimensions & Loads

Dimensions & LoadsFigure 292

Figure 292 Beam Clamp with Eye Nut

CLAMP SIZE	MAX LOAD	ROD SIZE A	BEAM WIDTH	BODY SIZE	MAX FLANGE THICKNESS	WEIGHT EACH
1	610	3/8	3 - 8	A	0.6	5.5
1	1130	1/2	3 - 8	A	0.6	5.5
1	1810	5/8	3 - 8	A	0.6	5.5
1	2710	3/4	3 - 8	A	0.6	5.5
2	3700	7/8	3 - 8	A	0.6	5.5
2	4960	1	3 - 8	A	0.6	5.5
3	610	3/8	4 - 11	B	0.6	9.0
3	1130	1/2	4 - 11	B	0.6	9.0
3	1810	5/8	4 - 11	B	0.6	9.0
3	2710	3/4	4 - 11	B	0.6	9.0
3	3700	7/8	4 - 11	B	0.6	9.0
3	4960	1	4 - 11	B	0.6	9.0
4	610	3/8	4 - 12	C	1.03	29.0
4	1130	1/2	4 - 12	C	1.03	29.0
4	1810	5/8	4 - 12	C	1.03	29.0
4	2710	3/4	4 - 12	C	1.03	29.0
4	3700	7/8	4 - 12	C	1.03	29.0
4	4960	1	4 - 12	C	1.03	29.0
5	610	3/8	11 - 15	D	1.03	33.3
5	1130	1/2	11 - 15	D	1.03	33.3
5	1810	5/8	11 - 15	D	1.03	33.3
5	2710	3/4	11 - 15	D	1.03	33.3
5	3700	7/8	11 - 15	D	1.03	33.3
5	4960	1	11 - 15	D	1.03	33.3
6	8000	1 1/4	4 - 12	C	1.03	29.0
6	11500	1 1/2	4 - 12	C	1.03	29.0
7	8000	1 1/4	11 - 15	D	1.03	33.3
7	11500	1 1/2	11 - 15	D	1.03	33.3
8	11500	1 3/4	4 - 12	C	1.03	29.0
8	11500	2	4 - 12	C	1.03	29.0
8	11500	1 3/4	4 - 12	C	1.03	29.0
8	11500	2	4 - 12	C	1.03	29.0

*Based on the allowable stresses shown in ANSI Code for Pressure Piping

CLAMP SIZE		1	2	3	4	5	6	7	8
BODY SIZE		A	A	B	C	D	C	D	C
ROD TAKEOUT “E” FOR WIDTH OF BEAM	3"	5 3/16	5 3/16
	4"	5 1/8	5 1/8	8 1/4	8 5/8		8 5/8		11 5/8
	5"	5	5	8 1/8	8 5/8		8 5/8		11 1/2
	6"	4 13/16	4 13/16	8 1/8	8 1/2		8 1/2		11 1/2
	7"	4 3/8	4 3/8	7 7/8	8 3/8		8 3/8		11 3/8
	8"	3 15/16	3 15/16	7 3/4	8 1/8		8 1/8		11 1/8
	9"			7 3/8	7 3/8		7 7/8		10 7/8
	10"			7 5/8	7 5/8		7 5/8		10 3/4
	11"			7	7	9 1/2	7	9 3/4	10 1/2
	12"			6 3/4	6 3/4	9 1/4	6 3/4	9 1/2	10
	13"					8 7/8		9 1/8
	14"					8 3/8		8 3/4
	15"					7 7/8		8 1/8

All dimensions are in inches.

Fig B292 Beam Clamp with Eye Nut

of 1

Sort By

View

Rod Size Beam Width Load Rating Weight Item # Availability Price Quantity UOM

3/8

3 - 8

2710

5.500

FIGB292-01-0037

3-5 Working Days

$129.90099/EA

See Quantity Discounts

#1 FIGURE B292 BEAM CLAMP WITH 3/8 EYE NUT

$129.90099/EA

Qty

3-5 Working Days

Product Detail

Quantity	Price
Quantity	Price
1	$129.90099/ EA
10	$123.40594/ EA
20	$110.41584/ EA
40	$90.93069/ EA

1/2

3 - 8

2710

5.500

FIGB292-01-0050

3-5 Working Days

$129.90099/EA

See Quantity Discounts

#1 FIGURE B292 BEAM CLAMP WITH 1/2 EYE NUT

$129.90099/EA

Qty

3-5 Working Days

Product Detail

Quantity	Price
Quantity	Price
1	$129.90099/ EA
10	$123.40594/ EA
20	$110.41584/ EA
40	$90.93069/ EA

5/8

3 - 8

2710

5.500

FIGB292-01-0062

3-5 Working Days

$129.90099/EA

See Quantity Discounts

#1 FIGURE B292 BEAM CLAMP WITH 5/8 EYE NUT

$129.90099/EA

Qty

3-5 Working Days

Product Detail

Quantity	Price
Quantity	Price
1	$129.90099/ EA
10	$123.40594/ EA
20	$110.41584/ EA
40	$90.93069/ EA

3/4

3 - 8

2710

5.500

FIGB292-01-0075

3-5 Working Days

$134.9615/EA

See Quantity Discounts

#1 FIGURE B292 BEAM CLAMP WITH 3/4 EYE NUT

$134.9615/EA

Qty

3-5 Working Days

Product Detail

Quantity	Price
Quantity	Price
1	$134.9615/ EA
10	$128.21342/ EA
20	$114.71727/ EA
40	$94.47305/ EA

MATERIAL	Carbon Steel with Forged Steel Eye Nut
COMPLIANCE	Federal Specification A-A-1192A (Type 4), ANSI/MSS SP-58 (Type 4)
NOTE	Fit jaws over edges of lower beam flanges and tighten nuts on tie rod to lock clamp in place. Weldless eye nut provides for horizontal pipe movement without binding, and is furnished tapped to any specific rod size up to the maximum rod size. Tie rod assures a tight non-slip fit to the beam. The application of a load to a structural beam by means of a beam clamp produces a transverse stress, perpendicular to the axis of the beam, in the flange to which the load is applied.

Fig B292 Beam Clamp with Eye Nut

Technical Data

Product Details

Product DetailsFigure 292

Dimensions & Loads

Dimensions & LoadsFigure 292

Installation Drawings

Installation DrawingsFigure 292

You've Selected

Rod Size

Load Rating

#1 FIGURE B292 BEAM CLAMP WITH 3/8 EYE NUT

#1 FIGURE B292 BEAM CLAMP WITH 1/2 EYE NUT

#1 FIGURE B292 BEAM CLAMP WITH 5/8 EYE NUT

#1 FIGURE B292 BEAM CLAMP WITH 3/4 EYE NUT