Home > Fasteners > Studs & Threaded Rod > Threaded Rod > F1554 Grade 105 All Thread Rod, Domestic

Enlarge

F1554 Grade 105 All Thread Rod, Domestic

ASTM F1554 Grade 105 all thread rod is manufactured from heat treated alloy steel, quenched and tempered. All thread rod listed below is melted and manufactured in the USA where specified domestic. Dimensional specifications are governed by ASME B18.31.3. Inch series fasteners meeting ASTM F1554 Grade 105 specifications are typically used for anchoring structural supports to concrete foundations. They are embedded in concrete and have a threaded portion which projects from the concrete. The embedded portion of the anchor bolt creates resistance to prevent the anchor from pulling out of the concrete when a load is applied. F1554 Grade 105 all thread may be dual certified ASTM A193 Grade B7 due to their properties being similar.

Products
Governing Standards
Mechanical Properties
Chemical Properties

No items were found

ASTM F1554	Covers straight, bent, headed, and headless anchor bolts (also known as anchor rods) made of carbon, medium carbon boron, alloy, or high-strength low alloy steel.
ASME B18.31.3	Covers the general and dimensional data for inch series threaded rods.
ASME B1.1 UNC & UNF Class 2A	Specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads.

Alloy, heat treated, high strength 105 ksi yield steel				Per ASTM F1554-15
Grade 105	Tensile Strength	Yield Strength, 0.2% offset	Elongation in 8 in. (1)	Elongation in 2 in. (1)	Reduction of Area
	ksi	Min ksi	Min %	Min %	Min %
	125-150	105	12	15	45

Per ASTM F1554-15
Grade 105	Phosphorus	Sulfur	Copper
	% by weight	% by weight	% by weight
	0.04 max	0.05 max	0.20 min

F1554 Grade 105 All Thread Rod, Domestic

Technical Data

Governing Standards

Governing StandardsF1554 Grade 105

Mechanical Properties

Mechanical PropertiesF1554 Grade 105

Chemical Properties

Chemical PropertiesF1554 Grade 105