Metric Shoulder Lifting Eye Bolts

DIN 580 Metric Shoulder Lifting Eye Bolts are forged, steel (C15E+Aluminum) threaded eye bolts intended for use with tapped holes that have been engineered as a lifting point. When equipped with a shoulder, these eye bolts can be used with angular loads up to 45°. (M14 & M22 are not included in DIN 580 specifications.) According to ASME B30.26 - Rigging Hardware, each eye bolt shall be marked to show: 1. Name or trademark of manufacturer, 2. Size or rated load and 3. Grade for alloy eye bolts.

Products
Governing Standards
Dimensional Specifications

Dimensional Specifications

Dimensional SpecificationsMetric Shoulder Lifting Eye Bolt

Metric Shoulder Lifting Eye Bolt dimensions

Per DIN 580
d1	Thread Pitch	d2	d4	h	k	d3	b	Maximum Permissible Load in lbs
Diameter		Eye Outside Diameter	Eye Inside Diameter	Ring Height Including Shoulder	Ring Width	Shoulder Diameter	Thread Length

								One Bolt @ 0°	Two Bolts @ 45°
								One Bolt @ 0°	Two Bolts @ 45°
(M6)	1	36	20	36	8	20	13.0	154	110
M8	1.25	36	20	36	8	20	13.0	308	209
M10	1.5	45	25	45	10	25	17.0	506	374
M12	1.75	54	30	53	12	30	20.5	748	528
(M14)	2	63	35	62	14	35	27.0	1078	748
M16	2	63	35	62	14	35	27.0	1540	1100
M20	2.5	72	40	71	16	40	30.0	2640	1826
(M22)	2.5	90	50	90	20	50	36.0	3300	2310
M24	3	90	50	90	20	50	36.0	3960	2794
(M27)	3	108	60	109	24	65	45.0	5500	3630
M30	3.5	108	60	109	24	65	45.0	7920	5720
(M33)	3.5	126	70	128	28	75	54.0	9460	7040
M36	4	126	70	128	28	75	54.0	11220	8140
(M39)	4	126	70	128	28	75	54.0	13420	9460
M42	4.5	144	80	147	32	85	63.0	15400	11000
(M45)	4.5	166	90	168	38	100	68.0	17600	12100
M48	5	166	90	168	38	100	68.0	18920	13420
(M52)	5	184	100	187	42	110	78.0	21780	16060
M56	5.5	184	100	187	42	110	78.0	25300	18260
M64	6	206	110	208	48	120	90.0	35200	24200
M72	6	260	140	260	60	150	100.0	46200	33000
M80	6	296	160	298	68	170	112.0	61600	44000
M100	6	330	180	330	75	190	130.0	83600	59400

All dimensions are in millimeters.
M6, M14, M22, M27, M33, M39, M45 & M52 are not included in DIN 580 and should not be considered for new designs. Also the dimensions could vary from what is shown.
If DIN 580 eye bolts are not stamped C15, refer to complete DIN standard for correct load information.

No items were found

Metric Shoulder Lifting Eye Bolts

Technical Data

Governing Standards

Governing StandardsMetric Shoulder Lifting Eye Bolt

Dimensional Specifications

Dimensional SpecificationsMetric Shoulder Lifting Eye Bolt