Skip to main content

3/8 Low Carbon Steel USS Flat Washer, Galvanized

Selected Grade 2 USS Flat Washer Hot Dipped GalvanizedUSS Flat Washer, Galvanized
Grade 2 USS Flat Washer Hot Dipped GalvanizedUSS Flat Washer, Galvanized

Product Specification

Grade
Grade 2, Carbon Steel
Finish
Hot Dipped Galvanized
Inside Diameter
0.4380
Outside Diameter
1.0000
Thickness
0.0830
Weight
0.015528
Diameter
3/8

Dimensional Specifications

USS Flat Washer dimensions
Per ASME B18.21.1-2009
Size Nominal A B C
Inside Diameter Outside Diameter Mean Section Thickness
Basic Tolerance
Plus		 Tolerance
Minus		 Basic Tolerance
Plus		 Tolerance
Minus		 Basic Max Min
#6 0.1380 0.1560 0.0080 0.0050 0.3750 0.0150 0.0050 0.0490 0.0650 0.0360
#8 0.1640 0.1880 0.0080 0.0050 0.4380 0.0150 0.0050 0.0490 0.0650 0.0360
#10 0.1900 0.2190 0.0080 0.0050 0.5000 0.0150 0.0050 0.0490 0.0650 0.0360
#12 0.2160 0.2500 0.0150 0.0050 0.5620 0.0150 0.0050 0.0650 0.0800 0.0510
1/4 0.2500 0.3120 0.0150 0.0050 0.7340 0.0150 0.0070 0.0650 0.0800 0.0510
5/16 0.3125 0.3750 0.0150 0.0050 0.8750 0.0300 0.0070 0.0830 0.1040 0.0640
3/8 0.3750 0.4380 0.0150 0.0050 1.0000 0.0300 0.0070 0.0830 0.1040 0.0640
7/16 0.4375 0.5000 0.0150 0.0050 1.2500 0.0300 0.0070 0.0830 0.1040 0.0640
1/2 0.5000 0.5620 0.0150 0.0050 1.3750 0.0300 0.0070 0.1090 0.1320 0.0860
9/16 0.5625 0.6250 0.0150 0.0050 1.4690 0.0300 0.0070 0.1090 0.1320 0.0860
5/8 0.6250 0.6880 0.0300 0.0070 1.7500 0.0300 0.0070 0.1340 0.1600 0.1080
3/4 0.7500 0.8120 0.0300 0.0070 2.0000 0.0300 0.0070 0.1480 0.1770 0.1220
7/8 0.8750 0.9380 0.0300 0.0070 2.2500 0.0300 0.0070 0.1650 0.1920 0.1360
1 1.0000 1.0625 0.0300 0.0070 2.5000 0.0300 0.0070 0.1650 0.1920 0.1360
1 1/8 1.1250 1.2500 0.0300 0.0070 2.7500 0.0300 0.0070 0.1650 0.1920 0.1360
1 1/4 1.2500 1.3750 0.0300 0.0070 3.0000 0.0300 0.0070 0.1650 0.1920 0.1360
1 3/8 1.3750 1.5000 0.0450 0.0100 3.2500 0.0450 0.1000 0.1800 0.2130 0.1530
1 1/2 1.5000 1.6250 0.0450 0.0100 3.5000 0.0450 0.0100 0.1800 0.2130 0.1530
1 5/8 1.6250 1.7500 0.0450 0.0100 3.7500 0.0450 0.0100 0.1800 0.2130 0.1530
1 3/4 1.7500 1.8750 0.0450 0.0100 4.0000 0.0450 0.0100 0.1800 0.2130 0.1530
1 7/8 1.8750 2.0000 0.0450 0.0100 4.2500 0.0450 0.0100 0.1800 0.2130 0.1530
2 2.0000 2.1250 0.0450 0.0100 4.5000 0.0450 0.0100 0.1800 0.2130 0.1530
2 1/4 2.2500 2.3750 0.0450 0.0100 4.7500 0.0450 0.0100 0.2200 0.2480 0.1930
2 1/2 2.5000 2.6250 0.0450 0.0100 5.0000 0.0450 0.0100 0.2380 0.2800 0.2100
2 3/4 2.7500 2.8750 0.0650 0.0100 5.2500 0.0650 0.0100 0.2590 0.3100 0.2280
3 3.0000 3.1250 0.0650 0.0100 5.5000 0.0650 0.0100 0.2840 0.3270 0.2490
  1. All dimensions are in inches.

Governing Standards

ASTM F844 Covers standard, unhardened steel washers for general use.
ASME B18.21.1 Covers the dimensional requirements, physical properties, and related test methods for helical spring-lock washers (#0 through 3 inches), tooth-lock washers (#2 through 1 ¼ inches), and plain washers (#0 through 3 inches).