Skip to main content

5/8 Low Carbon Steel USS Flat Washer, Plated

Selected Grade 2 USS Flat Washer PlatedUSS Flat Washer, Plated
Grade 2 USS Flat Washer PlatedUSS Flat Washer, Plated

Product Specification

Grade
Grade 2, Carbon Steel
Finish
Plated
Inside Diameter
0.6880
Outside Diameter
1.7500
Thickness
0.1340
Weight
0.078125
Diameter
5/8

Dimensional Specifications

<

USS Flat Washer dimensions
Per ASME B18.21.1-2009
Size Nominal A B C
Inside Diameter Outside Diameter Mean Section Thickness
Basic Tolerance
Plus		 Tolerance
Minus		 Basic Tolerance
Plus		 Tolerance
Minus		 Basic Max Min
#6 0.1380 0.1560 0.0080 0.0050 0.3750 0.0150 0.0050 0.0490 0.0650 0.0360
#8 0.1640 0.1880 0.0080 0.0050 0.4380 0.0150 0.0050 0.0490 0.0650 0.0360
#10 0.1900 0.2190 0.0080 0.0050 0.5000 0.0150 0.0050 0.0490 0.0650 0.0360
#12 0.2160 0.2500 0.0150 0.0050 0.5620 0.0150 0.0050 0.0650 0.0800 0.0510
1/4 0.2500 0.3120 0.0150 0.0050 0.7340 0.0150 0.0070 0.0650 0.0800 0.0510
5/16 0.3125 0.3750 0.0150 0.0050 0.8750 0.0300 0.0070 0.0830 0.1040 0.0640
3/8 0.3750 0.4380 0.0150 0.0050 1.0000 0.0300 0.0070 0.0830 0.1040 0.0640
7/16 0.4375 0.5000 0.0150 0.0050 1.2500 0.0300 0.0070 0.0830 0.1040 0.0640
1/2 0.5000 0.5620 0.0150 0.0050 1.3750 0.0300 0.0070 0.1090 0.1320 0.0860
9/16 0.5625 0.6250 0.0150 0.0050 1.4690 0.0300 0.0070 0.1090 0.1320 0.0860
5/8 0.6250 0.6880 0.0300 0.0070 1.7500 0.0300 0.0070 0.1340 0.1600 0.1080
3/4 0.7500 0.8120 0.0300 0.0070 2.0000 0.0300 0.0070 0.1480 0.1770 0.1220
7/8 0.8750 0.9380 0.0300 0.0070 2.2500 0.0300 0.0070 0.1650 0.1920 0.1360
1 1.0000 1.0625 0.0300 0.0070 2.5000 0.0300 0.0070 0.1650 0.1920 0.1360
1 1/8 1.1250 1.2500 0.0300 0.0070 2.7500 0.0300 0.0070 0.1650 0.1920 0.1360
1 1/4 1.2500 1.3750 0.0300 0.0070 3.0000 0.0300 0.0070 0.1650 0.1920 0.1360
1 3/8 1.3750 1.5000 0.0450 0.0100 3.2500 0.0450 0.1000 0.1800 0.2130 0.1530
1 1/2 1.5000 1.6250 0.0450 0.0100 3.5000 0.0450 0.0100 0.1800 0.2130 0.1530
1 5/8 1.6250 1.7500 0.0450 0.0100 3.7500 0.0450 0.0100 0.1800 0.2130 0.1530
1 3/4 1.7500 1.8750 0.0450 0.0100 4.0000 0.0450 0.0100 0.1800 0.2130 0.1530
1 7/8 1.8750 2.0000 0.0450 0.0100 4.2500 0.0450 0.0100 0.1800 0.2130 0.1530
2 2.0000 2.1250 0.0450 0.0100 4.5000 0.0450 0.0100 0.1800 0.2130 0.1530
2 1/4 2.2500 2.3750 0.0450 0.0100 4.7500 0.0450 0.0100 0.2200 0.2480 0.1930
2 1/2 2.5000 2.6250 0.0450 0.0100 5.0000 0.0450 0.0100 0.2380 0.2800 0.2100
2 3/4 2.7500 2.8750 0.0650 0.0100 5.2500 0.0650 0.0100 0.2590 0.3100 0.2280
3 3.0000 3.1250 0.0650 0.0100 5.5000 0.0650 0.0100 0.2840 0.3270 0.2490
  1. All dimensions are in inches.

Governing Standards

ASTM F844 Covers standard, unhardened steel washers for general use.
ASME B18.21.1 Covers the dimensional requirements, physical properties, and related test methods for helical spring-lock washers (#0 through 3 inches), tooth-lock washers (#2 through 1 ¼ inches), and plain washers (#0 through 3 inches).

Substitute Products