Skip to main content

1-8 X 2 1/2 F3125 Grade A325 Heavy Hex Bolt, Galvanized

Selected Strucutral A325 Heavy Hex Bolt Hot Dipped GalvanizedA325 Heavy Hex Bolt, Galvanized
Strucutral A325 Heavy Hex Bolt Hot Dipped GalvanizedA325 Heavy Hex Bolt, Galvanized

Product Specification

Length
2 1/2
Thread Length
1.75
Grade
Grade A325
Finish
Hot Dipped Galvanized
Weight
0.906400
Diameter
1

Mechanical Properties

Alloy Steel, Quenched & Tempered Per ASTM F3125/F3125M-15a
Grade A325 Tensile
Strength		 Yield
Strength		 Elongation
in 4D		 Reduction
in Area
Min psi Min psi Min % Min %
Inch 120 ksi 120,000 92,000 14 35

Dimensional Specifications

Heavy hex bolt dimensions
Per ASME B18.2.6-2010
Nominal Diameter UNC UNF E F G H LT Y
Body Diameter Width Across Flats Width Across Corners Head Height Thread Length Transition Length
Max Min Basic Max Min Max Min Basic Max Min Ref Max
1/2 0.500 13 20 0.515 0.482 7/8 0.875 0.850 1.010 0.969 11/32 0.364 0.302 1.000 0.190
5/8 0.625 11 18 0.642 0.605 1 1/16 1.062 1.031 1.227 1.175 27/64 0.444 0.378 1.250 0.220
3/4 0.750 10 16 0.768 0.729 1 1/4 1.250 1.212 1.443 1.383 1/2 0.524 0.455 1.380 0.250
7/8 0.875 9 14 0.895 0.852 1 7/16 1.438 1.394 1.660 1.589 37/64 0.604 0.531 1.500 0.280
1 1.000 8 14 1.022 0.976 1 5/8 1.625 1.575 1.876 1.796 43/64 0.700 0.591 1.750 0.310
1 1/8 1.125 7 12 1.149 1.098 1 13/16 1.812 1.756 2.093 2.002 3/4 0.780 0.658 2.000 0.340
1 1/4 1.250 7 12 1.277 1.223 2 2.000 1.938 2.309 2.209 27/32 0.876 0.749 2.000 0.380
1 3/8 1.375 6 12 1.404 1.345 2 3/16 2.188 2.119 2.526 2.416 29/32 0.940 0.810 2.250 0.440
1 1/2 1.500 6 12 1.531 1.470 2 3/8 2.375 2.300 2.742 2.622 1 1.036 0.902 2.250 0.440
  1. All dimensions are in inches.

Governing Standards

ASTM F3125 Covers the mechanical and material requirements for inch series fasteners used in automotive and related industries in diameters through 1-1/2″.
ASME B18.2.6 Covers the general and dimensional data for five products in the inch series recognized as American National Standard. These five structural products include: (a) Heavy Hex Structural Bolts: ASTM A 325 or ASTM A 490; (b) Heavy Hex Nuts: ASTM A 563; (c) Hardened Steel Washers; Circular, Circular Clipped or Beveled: ASTM F436; (d) Compressible Washer-Type Direct Tension Indicators: ASTM F 959; (e) Twist-Off-Type Tension Control Structural Bolts: Heavy Hex and Round: ASTM F1852.
ASME B1.1 UNC & UNF Class 2A Specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads.
SC Slip Critical Connection
N Bearing type connection with threads in the shear plane.
X Bearing type connection with no threads in the shear plane.

A325 Head Marking
A325 Material Marking

Chemical Properties

Per ASTM F3125/F3125M-15a
Grade Material Carbon Manganese Phosphorus Sulfur Silicon Boron
% by weight % by weight % by weight % by weight % by weight % by weight
A325 Type 1 Carbon or Alloy Steel with or without Boron 0.30-0.52 0.60 min 0.035 max 0.040 max 0.15-0.30 0.003 max

Substitute Products