Silicon Bronze Split Lock Washer

Manufacturers:

Silicon Bronze split lock washers are used under Silicon Bronze bolt heads or nuts to increase the hold of the fastener or to increase the bearing surface. Split lock washers are helical-shaped split rings. When fastened, the two ends exert a spring force on the fastener to create increased friction and resistance to motion. Dimensional specifications are governed by ASME B18.21.1.

Products

Loading algolia series attribute grid...

Dimensional Specifications

Per ASME B18.21.1-2009
Size	Nominal	A		B	T	W	BW
		Inside Diameter		Outside Diameter	Mean Section Thickness	Section Width	Bearing Width
		Max	Min	Max	Min	Min	Min
#2	0.0860	0.0940	0.0880	0.1720	0.0200	0.0350	0.0240
#3	0.0990	0.1070	0.1010	0.1950	0.0250	0.0400	0.0280
#4	0.1120	0.1200	0.1140	0.2090	0.0250	0.0400	0.0280
#5	0.1250	0.1330	0.1270	0.2360	0.0310	0.0470	0.0330
#6	0.1380	0.1480	0.1410	0.2500	0.0310	0.0470	0.0330
#8	0.1640	0.1740	0.1670	0.2930	0.0400	0.0550	0.0380
#10	0.1900	0.2000	0.1930	0.3340	0.0470	0.0620	0.0430
#12	0.2160	0.2270	0.2200	0.3770	0.0560	0.0700	0.0490
1/4	0.2500	0.2600	0.2520	0.4870	0.0620	0.1090	0.0760
5/16	0.3125	0.3220	0.3140	0.5830	0.0780	0.1250	0.0870
3/8	0.3750	0.3850	0.3770	0.6800	0.0940	0.1410	0.0990
7/16	0.4375	0.4500	0.4400	0.7760	0.1090	0.1560	0.1090
1/2	0.5000	0.5120	0.5020	0.8690	0.1250	0.1710	0.1200
9/16	0.5625	0.5740	0.5640	0.9650	0.1410	0.1880	0.1320
5/8	0.6250	0.6410	0.6280	1.0730	0.1560	0.2090	0.1420
3/4	0.7500	0.7660	0.7530	1.2650	0.1880	0.2340	0.1640
7/8	0.8750	0.8940	0.8780	1.4590	0.2190	0.2660	0.1860
1	1.0000	1.0240	1.0030	1.6560	0.2500	0.2970	0.2080

All dimensions are in inches.

Governing Standards

ASME B18.21.1

Covers the dimensional requirements, physical properties, and related test methods for helical spring-lock washers (#0 through 3 inches), tooth-lock washers (#2 through 1 ¼ inches), and plain washers (#0 through 3 inches).

Loading product details...