Skip to main content

Tealon 1570 Ring Gasket

Selected Teadit Tealon TF1570 Reustructured PTFE with Glass Spheres Full Face GasketRing Gaskets
Teadit Tealon TF1570 Reustructured PTFE with Glass Spheres Full Face GasketRing Gaskets

Ring gaskets are a flat sealing element, consisting of an inner and outer diameter sized to fit a flange's bore and bolt circle. Ring gaskets sit inside the flange's bolt circle. ASME B16.21 and ASME B16.47 govern the dimensions of ring gaskets for standard and large diameter pipe flanges. Teadit Tealon TF 1570 is a restructured PTFE sheet manufactured by a unique process which provides a high level of fibrillation to overcome the creep relaxation and cold flow problems associated with normal (skived or molded) PTFE sheets. This style is produced from virgin PTFE resin filled with hollow glass micro spheres. Tealon TF 1570 is suitable for service with a wide variety of aggressive fluids, including hydrocarbons, acids, solvents, water, steam, hydrogen-peroxide, refrigerants, etc. The high compressibility of this style makes it particularly suitable for use with stress sensitive and/or fragile flanged joints, e.g. glass, ceramics, plastic, etc. The gasket material was tested to be in conformance with FDA requirements per Method 21 CFR 177.2260.

Products

Physical Properties

Typical Physical Properties:
Color Blue
Compressibility - ASTM F36 M 25-40%
Recovery - ASTM F36 M 30%
Tensile Strength - ASTM F152 2030 psi (14 N/mm^2)
Specific Gravity - ASTM 0792 1.70 g /cm^3
Creep Relaxation - ASTM F38 40%
Sealability - ASTM F37 A 0.12ml/h
Sealability - DIN 3535 <.015 cm^3 / min

Service Limits

Temperature Minimum Service: -450F (-268C)
Maximum Service: 500F (260C)
Pressure Maximum Service: 800 psi (55 bar)
pH 0-14

Dimensional Specifications

Per ASME B16.21-2016
  Pipe Diameter
1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 24
Inside Diameter 0.84 1.06 1.31 1.66 2.38 2.38 2.88 3.50 4.00 4.50 5.56 6.63 8.63 10.75 12.75 14.00 16.00 18.00 20.00 24.00
Outside
Diameter
per Class		 150# 1.88 2.25 2.62 3.00 3.38 4.12 4.88 5.38 6.38 6.88 7.75 8.75 11.00 13.38 16.13 17.75 20.25 21.62 23.88 28.25
300# 2.12 2.62 2.88 3.25 3.75 4.38 5.12 5.88 6.50 7.12 8.50 9.88 12.12 14.25 16.62 19.12 21.25 23.50 25.75 30.50
600# 2.12 2.62 2.88 3.25 3.75 4.38 5.12 5.88 6.38 7.62 9.50 10.50 12.62 15.75 18.00 19.38 22.25 24.12 26.88 31.12
Per ASME B16.47-2017
Series A Pipe Diameter
26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
Inside Diameter 26.00 28.00 30.00 32.00 34.00 36.00 38.00 40.00 42.00 44.00 46.00 48.00 50.00 52.00 54.00 56.00 58.00 60.00
Outside
Diameter
per Class		 150# 30.50 32.75 34.75 37.00 39.00 41.25 43.75 45.75 48.00 50.25 52.25 54.50 56.50 58.75 61.00 63.25 65.50 67.50
300# 32.88 35.38 37.50 39.62 41.62 44.00 41.50 43.88 45.88 48.00 50.12 52.12 54.25 56.25 58.75 60.75 62.75 64.75
600# 34.12 36.00 38.25 40.25 42.25 44.50 43.50 45.50 48.00 50.00 52.26 54.75 57.00 59.00 61.25 63.50 65.50 67.75
Per ASME B16.47-2017
Series B Pipe Diameter
26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
Inside Diameter 26.00 28.00 30.00 32.00 34.00 36.00 38.00 40.00 42.00 44.00 46.00 48.00 50.00 52.00 54.00 56.00 58.00 60.00
Outside
Diameter
per Class		 150# 28.56 30.56 32.56 34.69 36.81 38.88 41.12 43.12 45.12 47.12 49.44 51.44 53.44 55.44 57.62 59.62 62.19 64.19
300# 30.38 32.50 34.88 37.00 39.12 41.25 43.25 45.25 47.25 49.25 51.88 53.88 55.88 57.88 61.25 62.75 65.19 67.12
600# 30.12 32.25 34.62 36.75 39.25 41.25                        
  1. All dimensions are in inches.

Governing Standards

ASME B16.21 Covers types, sizes, materials, dimensions, tolerances, and markings for nonmetallic flat gaskets.
ASME B16.47 Covers pressure-temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges in sizes NPS 26 through NPS 60. Included are flanges with rating class designations 75, 150, 300, 400, 600, and 900 with requirements given in both SI (Metric) and U. S. Customary units, with diameter of bolts and flange bolt hole expressed in inch units.