2'' #600 A105 Raised Face Slip-On Flange Approved
Selected A105 Raised Face Slip On Flange 024'' #600 A105 Raised Face Slip-On Flange
2'' #600 A105 Raised Face Slip-On Flange Approved
Item #: PSO60RFC2-NX
Manufacturers:
Product Specification
| Grade | A105 |
|---|---|
| Pipe Diameter | 2 |
| Flange Rating | 600# |
| Outside Diameter | 6.5000 |
| Bolt Hole Circle | 5.0000 |
| # of Bolt Holes | 8 |
| Bolt Hole Diameter | 3/4 |
| Material | Steel |
| Finish | Black |
| Country of Origin | Approved |
| Weight | 9.000000 |
Mechanical Properties
| Per ASTM A105-A105M - 24 | |||||
| Grade A105 | Tensile Strength | Yield Strength | Elongation in 4D | Reduction in Area | Hardness |
| Min ksi [MPa] | Min ksi [Mpa] | Min % | Min % | Max | |
| 70 [485] | 36 [250] | 22 | 30 | 197 |
Chemical Properties
| Element | Carbon | Manganese | Phosphorus | Sulfur | Silicon | Copper | Nickel | Chromium | Molybdenum | Vanadium |
| Composition, % | 0.35 max | 0.60-1.05 | 0.035 max | 0.040 max | 0.10-0.35 | 0.40 max (1) | 0.40 max (1) | 0.30 max (1-2) | 0.12 max (1-2) | 0.08 max |
- 1. The sum of copper, nickel, chromium, molybdenum and vanadium shall not exceed 1.00%
- 2. The sum of chromium and molybdenum shall not exceed 0.32%
- Note: For each reduction of 0.01% below the specified carbon maximum (0.35%), an increase of 0.006% manganese above the specified maximum (1.05%) will be permitted up to a maximum of 1.35%.
Governing Standards
| ASTM A105 | Covers forged carbon steel piping components for ambient- and higher-temperature service in pressure systems. Included are flanges, fittings, Valves, and similar parts ordered either to dimensions specified by the purchaser or to dimensional standards. |
|---|---|
| ASME B16.11 | Covers ratings, dimensions, tolerances, marking and material requirements for socket-welding and threaded forged fittings. These fittings are designated as Class 2000, 3000, and 6000 for threaded end fittings and Class 3000, 6000, and 9000 for socket-weld end fittings. |
Dimensional Specifications
Class #150 Dimensions |
Length Through Hub | Bore | Drilling | Length of Bolts | |||||||||
| Pipe Size | Outside Diameter of Flange | Thickness of Flange (Min.) | Diameter of Hub | Threaded Length Through Hub Neck | Thread Length (Min.) | Slip-on Bore (Min.) | Diameter of Bolt Circle | Diameter of Bolt Holes | Number of Bolt Holes | Diameter of Bolts | Stud Bolts Raised Face 0.06 in. | Stud Bolts Ring Joint | Machine Bolts Raised Face 0.06 in. |
| O.D. | C | W | Y2 | T | B2 | M | P | P | P | ||||
| 1/2 | 3.50 | 0.38 | 1.19 | 0.56 | 0.62 | 0.88 | 2.38 | 5/8 | 4.00 | 1/2 | 2.25 | 2.00 | |
| 3/4 | 3.88 | 0.44 | 1.50 | 0.56 | 0.62 | 1.09 | 2.75 | 5/8 | 4.00 | 1/2 | 2.50 | 2.00 | |
| 1 | 4.25 | 0.50 | 1.94 | 0.62 | 0.69 | 1.36 | 3.12 | 5/8 | 4.00 | 1/2 | 2.50 | 3.00 | 2.25 |
| 1 1/4 | 4.62 | 0.56 | 2.31 | 0.75 | 0.81 | 1.7 | 3.50 | 5/8 | 4.00 | 1/2 | 2.75 | 3.25 | 2.25 |
| 1 1/2 | 5.00 | 0.62 | 2.56 | 0.81 | 0.88 | 1.95 | 3.88 | 5/8 | 4.00 | 1/2 | 2.75 | 3.25 | 2.50 |
| 2 | 6.00 | 0.69 | 3.06 | 0.94 | 1.00 | 2.44 | 4.75 | 3/4 | 4.00 | 5/8 | 3.25 | 3.75 | 2.75 |
| 2 1/2 | 7.00 | 0.81 | 3.56 | 1.06 | 1.12 | 2.94 | 5.50 | 3/4 | 4.00 | 5/8 | 3.50 | 4.00 | 3.00 |
| 3 | 7.50 | 0.88 | 4.25 | 1.12 | 1.19 | 3.57 | 6.00 | 3/4 | 4.00 | 5/8 | 3.50 | 4.00 | 3.00 |
| 3 1/2 | 8.50 | 0.88 | 4.81 | 1.19 | 1.25 | 4.07 | 7.00 | 3/4 | 8.00 | 5/8 | 3.50 | 4.00 | 3.00 |
| 4 | 9.00 | 0.88 | 5.31 | 1.25 | 1.31 | 4.57 | 7.50 | 3/4 | 8.00 | 5/8 | 3.50 | 4.00 | 3.00 |
| 5 | 10.00 | 0.88 | 6.44 | 1.38 | 1.44 | 5.66 | 8.50 | 7/8 | 8.00 | 3/4 | 3.75 | 4.25 | 3.25 |
| 6 | 11.00 | 0.94 | 7.56 | 1.50 | 1.56 | 6.72 | 9.50 | 7/8 | 8.00 | 3/4 | 4.00 | 4.50 | 3.25 |
| 8 | 13.50 | 1.06 | 9.69 | 1.69 | 1.75 | 8.72 | 11.75 | 7/8 | 8.00 | 3/4 | 4.25 | 4.75 | 3.50 |
| 10 | 16.00 | 1.12 | 12.00 | 1.88 | 1.94 | 10.88 | 14.25 | 1 | 12.00 | 7/8 | 4.50 | 5.00 | 4.00 |
| 12 | 19.00 | 1.19 | 14.38 | 2.12 | 2.19 | 12.88 | 17.00 | 1 | 12.00 | 7/8 | 4.75 | 5.25 | 4.00 |
| 14 | 21.00 | 1.31 | 15.75 | 2.19 | 2.25 | 14.14 | 18.75 | 1 1/8 | 12.00 | 1 | 5.25 | 5.75 | 4.50 |
| 16 | 23.50 | 1.38 | 18.00 | 2.44 | 2.50 | 16.16 | 21.25 | 1 1/8 | 16.00 | 1 | 5.25 | 5.75 | 4.50 |
| 18 | 25.00 | 1.50 | 19.80 | 2.62 | 2.69 | 18.18 | 22.75 | 1 1/4 | 16.00 | 1 1/8 | 5.75 | 6.25 | 5.00 |
| 20 | 27.50 | 1.62 | 22.00 | 2.81 | 2.88 | 20.2 | 25.00 | 1 1/4 | 20.00 | 1 1/8 | 6.25 | 6.75 | 5.50 |
| 24 | 32.00 | 1.81 | 26.12 | 3.19 | 3.25 | 24.25 | 29.50 | 1 3/8 | 20.00 | 1 1/8 | 6.75 | 7.25 | 6.00 |
Class #300 Dimensions |
Drilling | Length of Bolts | Length Through Hub | Bore | ||||||||
| Pipe Size | Outside Diameter of Flange | Thickness of Flange (Min.) | Diameter of Bolt Circle | Diameter of Bolt Holes | Number of Bolt Holes | Diameter of Bolts | Stud Bolts Raised Face 0.06 in. | Stud Bolts Ring Joint | Machine Bolts Raised Face 0.06 in. | Diameter of Hub | Threaded Length Through Hub Neck | Slip-on Bore (Min.) |
| O.D. | C | M | P | P | P | W | Y2 | B2 | ||||
| 1/2 | 3.75 | 0.5 | 2.62 | 5/8 | 4 | 1/2 | 2.50 | 3.00 | 2.25 | 1.50 | 0.81 | 0.88 |
| 3/4 | 4.62 | 0.56 | 3.25 | 3/4 | 4 | 5/8 | 3.00 | 3.50 | 2.50 | 1.88 | 0.94 | 1.09 |
| 1 | 4.88 | 0.62 | 3.5 | 3/4 | 4 | 5/8 | 3.00 | 3.50 | 2.50 | 2.12 | 1.00 | 1.36 |
| 1 1/4 | 5.25 | 0.69 | 3.88 | 3/4 | 4 | 5/8 | 3.25 | 3.75 | 2.75 | 2.50 | 1.00 | 1.70 |
| 1 1/2 | 6.12 | 0.75 | 4.50 | 7/8 | 4 | 3/4 | 3.50 | 4.00 | 3.00 | 2.75 | 1.13 | 1.95 |
| 2 | 6.50 | 0.81 | 5.00 | 3/4 | 8 | 5/8 | 3.50 | 4.00 | 3.00 | 3.31 | 1.25 | 2.44 |
| 2 1/2 | 7.50 | 0.94 | 5.88 | 7/8 | 8 | 3/4 | 4.00 | 4.50 | 3.25 | 3.94 | 1.44 | 2.94 |
| 3 | 8.25 | 1.06 | 6.62 | 7/8 | 8 | 3/4 | 4.25 | 4.75 | 3.50 | 4.62 | 1.63 | 3.57 |
| 3 1/2 | 9.00 | 1.12 | 7.25 | 7/8 | 8 | 3/4 | 4.25 | 5.00 | 3.75 | 5.25 | 1.69 | 4.07 |
| 4 | 10.00 | 1.19 | 7.88 | 7/8 | 8 | 3/4 | 4.50 | 5.00 | 3.75 | 5.75 | 1.82 | 4.57 |
| 5 | 11.00 | 1.31 | 9.25 | 7/8 | 8 | 3/4 | 4.75 | 5.25 | 4.25 | 7.00 | 1.94 | 5.66 |
| 6 | 12.50 | 1.38 | 10.62 | 7/8 | 12 | 3/4 | 4.75 | 5.50 | 4.25 | 8.12 | 2.00 | 6.72 |
| 8 | 15.00 | 1.56 | 13.00 | 1 | 12 | 7/8 | 5.50 | 6.00 | 4.75 | 10.25 | 2.38 | 8.72 |
| 10 | 17.50 | 1.81 | 15.25 | 1 1/8 | 16 | 1 | 6.25 | 6.75 | 5.50 | 12.62 | 2.56 | 10.88 |
| 12 | 20.50 | 1.94 | 17.75 | 1 1/4 | 16 | 1 1/8 | 6.75 | 7.25 | 5.75 | 14.75 | 2.82 | 12.88 |
| 14 | 23.00 | 2.06 | 20.25 | 1 1/4 | 20 | 1 1/8 | 7.00 | 7.50 | 6.25 | 16.75 | 2.94 | 14.14 |
| 16 | 25.50 | 2.19 | 22.50 | 1 3/8 | 20 | 1 1/4 | 7.50 | 8.00 | 6.50 | 19.00 | 3.19 | 16.16 |
| 18 | 28.00 | 2.31 | 24.75 | 1 3/8 | 24 | 1 1/4 | 7.75 | 8.25 | 6.75 | 21.00 | 3.44 | 18.18 |
| 20 | 30.50 | 2.44 | 27.00 | 1 3/8 | 24 | 1 1/4 | 8.00 | 8.75 | 7.25 | 23.12 | 3.69 | 20.20 |
| 24 | 36.00 | 2.69 | 32.00 | 1 5/8 | 24 | 1 1/2 | 9.00 | 10.00 | 8.00 | 27.62 | 4.13 | 24.25 |
Class #600 Dimensions |
Drilling | Length of Bolts | Length Through Hub | Bore | ||||||||
| Pipe Size | Outside Diameter of Flange | Thickness of Flange (Min.) | Diameter of Bolt Circle | Diameter of Bolt Holes | Number of Bolt Holes | Diameter of Bolts | Raised Face 0.25 in. | Tongue & Groove | Ring Joint | Diameter of Hub | Threaded Length Through Hub Neck | Slip-on Bore (Min.) |
| O.D. | C | M | P | P | P | W | Y2 | B2 | ||||
| 1/2 | 3.75 | 0.56 | 2.62 | 5/8 | 4 | 1/2 | 3.00 | 2.75 | 3.00 | 1.50 | 0.88 | 0.88 |
| 3/4 | 4.62 | 0.62 | 3.25 | 3/4 | 4 | 5/8 | 3.50 | 3.25 | 3.50 | 1.88 | 1 | 1.09 |
| 1 | 4.88 | 0.69 | 3.50 | 3/4 | 4 | 5/8 | 3.50 | 3.25 | 3.50 | 2.12 | 1.06 | 1.36 |
| 1 1/4 | 5.25 | 0.81 | 3.88 | 3/4 | 4 | 5/8 | 3.75 | 3.50 | 3.75 | 2.50 | 1.12 | 1.70 |
| 1 1/2 | 6.12 | 0.88 | 4.50 | 7/8 | 4 | 3/4 | 4.25 | 4.00 | 4.25 | 2.75 | 1.25 | 1.95 |
| 2 | 6.50 | 1.00 | 5.00 | 3/4 | 8 | 5/8 | 4.25 | 4.00 | 4.25 | 3.31 | 1.44 | 2.44 |
| 2 1/2 | 7.50 | 1.12 | 5.88 | 7/8 | 8 | 3/4 | 4.75 | 4.50 | 4.75 | 3.94 | 1.62 | 2.94 |
| 3 | 8.25 | 1.25 | 6.62 | 7/8 | 8 | 3/4 | 5.00 | 4.75 | 5.00 | 4.62 | 1.81 | 3.57 |
| 3 1/2 | 9.00 | 1.38 | 7.25 | 1 | 8 | 7/8 | 5.50 | 5.25 | 5.50 | 5.25 | 1.94 | 4.07 |
| 4 | 10.75 | 1.50 | 8.50 | 1 | 8 | 7/8 | 5.75 | 5.50 | 5.75 | 6.00 | 2.12 | 4.57 |
| 5 | 13.00 | 1.75 | 10.50 | 1 1/8 | 8 | 1 | 6.50 | 6.25 | 6.50 | 7.44 | 2.38 | 5.66 |
| 6 | 14.00 | 1.88 | 11.50 | 1 1/8 | 12 | 1 | 6.75 | 6.50 | 6.75 | 8.75 | 2.62 | 6.72 |
| 8 | 16.50 | 2.19 | 13.75 | 1 1/4 | 12 | 1 1/8 | 7.50 | 7.25 | 7.75 | 10.75 | 3 | 8.72 |
| 10 | 20.00 | 2.50 | 17.00 | 1 3/8 | 16 | 1 1/4 | ||||||