#3 Figure G292 Beam Clamp With 7/8 Eye Nut, Galvanized
#3 Figure G292 Beam Clamp With 7/8 Eye Nut, Galvanized
Item #: FIGG292-03-0087
Manufacturers:
Product Specification
| Figure | Figure 292 |
|---|---|
| Rod Size | 7/8 |
| Beam Width | 4 - 11 |
| Load Rating | 4960 |
| Material | Steel |
| Finish | Hot Dipped Galvanized |
| Country of Origin | Unrestricted Origin |
| Weight | 9.045000 |
Product Details
| MATERIAL | Hot Dipped Galvanized Carbon Steel with Forged Steel Eye Nut |
| COMPLIANCE | Federal Specification A-A-1192A (Type 4), ANSI/MSS SP-58 (Type 4) |
| NOTE | Fit jaws over edges of lower beam flanges and tighten nuts on tie rod to lock clamp in place. Weldless eye nut provides for horizontal pipe movement without binding, and is furnished tapped to any specific rod size up to the maximum rod size. Tie rod assures a tight non-slip fit to the beam. The application of a load to a structural beam by means of a beam clamp produces a transverse stress, perpendicular to the axis of the beam, in the flange to which the load is applied. |
Installation Drawings
Dimensions & Loads
| CLAMP SIZE |
MAX LOAD |
ROD SIZE A |
BEAM WIDTH |
BODY SIZE |
MAX FLANGE THICKNESS |
WEIGHT EACH |
| 1 | 610 | 3/8 | 3 - 8 | A | 0.6 | 5.5 |
| 1 | 1130 | 1/2 | 3 - 8 | A | 0.6 | 5.5 |
| 1 | 1810 | 5/8 | 3 - 8 | A | 0.6 | 5.5 |
| 1 | 2710 | 3/4 | 3 - 8 | A | 0.6 | 5.5 |
| 2 | 3700 | 7/8 | 3 - 8 | A | 0.6 | 5.5 |
| 2 | 4960 | 1 | 3 - 8 | A | 0.6 | 5.5 |
| 3 | 610 | 3/8 | 4 - 11 | B | 0.6 | 9.0 |
| 3 | 1130 | 1/2 | 4 - 11 | B | 0.6 | 9.0 |
| 3 | 1810 | 5/8 | 4 - 11 | B | 0.6 | 9.0 |
| 3 | 2710 | 3/4 | 4 - 11 | B | 0.6 | 9.0 |
| 3 | 3700 | 7/8 | 4 - 11 | B | 0.6 | 9.0 |
| 3 | 4960 | 1 | 4 - 11 | B | 0.6 | 9.0 |
| 4 | 610 | 3/8 | 4 - 12 | C | 1.03 | 29.0 |
| 4 | 1130 | 1/2 | 4 - 12 | C | 1.03 | 29.0 |
| 4 | 1810 | 5/8 | 4 - 12 | C | 1.03 | 29.0 |
| 4 | 2710 | 3/4 | 4 - 12 | C | 1.03 | 29.0 |
| 4 | 3700 | 7/8 | 4 - 12 | C | 1.03 | 29.0 |
| 4 | 4960 | 1 | 4 - 12 | C | 1.03 | 29.0 |
| 5 | 610 | 3/8 | 11 - 15 | D | 1.03 | 33.3 |
| 5 | 1130 | 1/2 | 11 - 15 | D | 1.03 | 33.3 |
| 5 | 1810 | 5/8 | 11 - 15 | D | 1.03 | 33.3 |
| 5 | 2710 | 3/4 | 11 - 15 | D | 1.03 | 33.3 |
| 5 | 3700 | 7/8 | 11 - 15 | D | 1.03 | 33.3 |
| 5 | 4960 | 1 | 11 - 15 | D | 1.03 | 33.3 |
| 6 | 8000 | 1 1/4 | 4 - 12 | C | 1.03 | 29.0 |
| 6 | 11500 | 1 1/2 | 4 - 12 | C | 1.03 | 29.0 |
| 7 | 8000 | 1 1/4 | 11 - 15 | D | 1.03 | 33.3 |
| 7 | 11500 | 1 1/2 | 11 - 15 | D | 1.03 | 33.3 |
| 8 | 11500 | 1 3/4 | 4 - 12 | C | 1.03 | 29.0 |
| 8 | 11500 | 2 | 4 - 12 | C | 1.03 | 29.0 |
| 8 | 11500 | 1 3/4 | 4 - 12 | C | 1.03 | 29.0 |
| 8 | 11500 | 2 | 4 - 12 | C | 1.03 | 29.0 |
- *Based on the allowable stresses shown in ANSI Code for Pressure Piping
| CLAMP SIZE | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
| BODY SIZE | A | A | B | C | D | C | D | C | |
| ROD TAKEOUT “E” FOR WIDTH OF BEAM |
3" | 5 3/16 | 5 3/16 | ||||||
| 4" | 5 1/8 | 5 1/8 | 8 1/4 | 8 5/8 | 8 5/8 | 11 5/8 | |||
| 5" | 5 | 5 | 8 1/8 | 8 5/8 | 8 5/8 | 11 1/2 | |||
| 6" | 4 13/16 | 4 13/16 | 8 1/8 | 8 1/2 | 8 1/2 | 11 1/2 | |||
| 7" | 4 3/8 | 4 3/8 | 7 7/8 | 8 3/8 | 8 3/8 | 11 3/8 | |||
| 8" | 3 15/16 | 3 15/16 | 7 3/4 | 8 1/8 | 8 1/8 | 11 1/8 | |||
| 9" | 7 3/8 | 7 3/8 | 7 7/8 | 10 7/8 | |||||
| 10" | 7 5/8 | 7 5/8 | 7 5/8 | 10 3/4 | |||||
| 11" | 7 | 7 | 9 1/2 | 7 | 9 3/4 | 10 1/2 | |||
| 12" | 6 3/4 | 6 3/4 | 9 1/4 | 6 3/4 | 9 1/2 | 10 | |||
| 13" | 8 7/8 | 9 1/8 | |||||||
| 14" | 8 3/8 | 8 3/4 | |||||||
| 15" | 7 7/8 | 8 1/8 | |||||||
- All dimensions are in inches.