Skip to main content

36 150# Series A 1/16 Teadit 1001 Non-Asbestos Ring Gasket

Selected Teadit 1001 Non-Asbestos Green Sheet Ring GasketTeadit 1001 Ring Gasket
Teadit 1001 Non-Asbestos Green Sheet Ring GasketTeadit 1001 Ring Gasket

Product Specification

Pipe Diameter
36
Flange Rating
150#
Full Face or Ring
Ring
Series
Series A
Inside Diameter
36.0000
Outside Diameter
41.2500
Thickness
1/16
Filler/Binder Material
Nitrile Rubber (NBR)
Sheet Material
Teadit NA 1001
Material
Aramid Fiber
Country of Origin
Unrestricted Origin
Weight
1.255771

Dimensional Specifications

Per ASME B16.21-2016
  Pipe Diameter
1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 24
Inside Diameter 0.84 1.06 1.31 1.66 2.38 2.38 2.88 3.50 4.00 4.50 5.56 6.63 8.63 10.75 12.75 14.00 16.00 18.00 20.00 24.00
Outside
Diameter
per Class		 150# 1.88 2.25 2.62 3.00 3.38 4.12 4.88 5.38 6.38 6.88 7.75 8.75 11.00 13.38 16.13 17.75 20.25 21.62 23.88 28.25
300# 2.12 2.62 2.88 3.25 3.75 4.38 5.12 5.88 6.50 7.12 8.50 9.88 12.12 14.25 16.62 19.12 21.25 23.50 25.75 30.50
600# 2.12 2.62 2.88 3.25 3.75 4.38 5.12 5.88 6.38 7.62 9.50 10.50 12.62 15.75 18.00 19.38 22.25 24.12 26.88 31.12
Per ASME B16.47-2017
Series A Pipe Diameter
26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
Inside Diameter 26.00 28.00 30.00 32.00 34.00 36.00 38.00 40.00 42.00 44.00 46.00 48.00 50.00 52.00 54.00 56.00 58.00 60.00
Outside
Diameter
per Class		 150# 30.50 32.75 34.75 37.00 39.00 41.25 43.75 45.75 48.00 50.25 52.25 54.50 56.50 58.75 61.00 63.25 65.50 67.50
300# 32.88 35.38 37.50 39.62 41.62 44.00 41.50 43.88 45.88 48.00 50.12 52.12 54.25 56.25 58.75 60.75 62.75 64.75
600# 34.12 36.00 38.25 40.25 42.25 44.50 43.50 45.50 48.00 50.00 52.26 54.75 57.00 59.00 61.25 63.50 65.50 67.75
Per ASME B16.47-2017
Series B Pipe Diameter
26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
Inside Diameter 26.00 28.00 30.00 32.00 34.00 36.00 38.00 40.00 42.00 44.00 46.00 48.00 50.00 52.00 54.00 56.00 58.00 60.00
Outside
Diameter
per Class		 150# 28.56 30.56 32.56 34.69 36.81 38.88 41.12 43.12 45.12 47.12 49.44 51.44 53.44 55.44 57.62 59.62 62.19 64.19
300# 30.38 32.50 34.88 37.00 39.12 41.25 43.25 45.25 47.25 49.25 51.88 53.88 55.88 57.88 61.25 62.75 65.19 67.12
600# 30.12 32.25 34.62 36.75 39.25 41.25                        
  1. All dimensions are in inches.

Physical Properties

Typical Physical Properties:
Color Green - NA1001G
Density 109 lb/ft^3 (1.75 g/cm^3)
Compressibility - ASTM F36 J 7-17%
Recovery - ASTM F36 J min 45%
Tensile Strength Across Grain - ASTM F38 1670psi (11.5 N/mm^2)
Ignition Loss - ASTM F495 max 34%
Thickness Increase - ASTM F146 - after 5hr
ASTM IRM 903 @ 300F (150C) max 12%
ASTM Fuel B @ 77F (25C) max 10%
Weight Increase - ASTM F146 - after 5hr
ASTM IRM 903 @ 300F (150C) max 15%
ASTM Fuel B @ 77F (25C) max 15%
Creep Relaxation - ASTM F38 25%
Torque Retention (DIN 52913) 28N/mm^2
Sealability @ 1000psi - ASTM F37 max 0.25 ml/hr

Governing Standards

ASME B16.21 Covers types, sizes, materials, dimensions, tolerances, and markings for nonmetallic flat gaskets.
ASME B16.47 Covers pressure-temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges in sizes NPS 26 through NPS 60. Included are flanges with rating class designations 75, 150, 300, 400, 600, and 900 with requirements given in both SI (Metric) and U. S. Customary units, with diameter of bolts and flange bolt hole expressed in inch units.

Service Limits

Temperature Continuous Service: 464F (240C)
Maximum Service: 750F (400C)
Pressure Continuous Service: 725 psi (50 bar)
Maximum Service: 1595 psi (110 bar)
ASTM Line Call
Out F104		 F712120E22M5