Skip to main content

Fig G40 Standard Riser Clamp, Galvanized

Selected Figure G40 Riser Clamp Hot Dipped GalvanizedFig G40 Standard Riser Clamp, Galvanized
Figure G40 Riser Clamp Hot Dipped GalvanizedFig G40 Standard Riser Clamp, Galvanized

The figure G40 hot dipped galvanized riser clamp is designed to support vertical piping by resting on shear lugs welded to the pipe. Shear lugs are not included, and must be ordered separately, if needed.

Products

Dimensions & Loads

Figure 40 Standard Riser ClampFigure 40 Standard Riser Clamp

PIPE
SIZE		 MAX
LOAD		 A B C C - C E F K S WEIGHT
EA
2 900 1 1/4 2 - 18 9 1/2 3/16 3/4 17.5
2 1/2 900 1 1/4 2 - 20 10 1/2 1 1/16 3/4 19.1
3 1500 1 1/2 2 - 20 10 5/8 1 3/8 3/4 29.4
4 2200 1 1/2 2 - 22 11 3/4 1 7/8 3/4 38.5
5 2200 3/4 2 - 22 11 3/4 2 3/8 3/4 43.2
6 3000 7/8 2 - 24 12 7/8 2 13/16 1 56.8
8 3000 7/8 2 - 27 13 1/2 7/8 3 13/16 1 79.2
10 5500 1 1/4 2 - 30 15 1 1/4 4 5/8 1 1/2 143
12 7800 1 3/8 2 1/2 - 32 16 1 1/2 5 1/2 1 3/4 184
14 7800 1 3/8 2 1/2 - 34 17 1 1/2 6 1/8 1 3/4 195
16 9000 1 1/2 2 1/2 - 36 18 1 1/2 7 2 225
18 9000 1 1/2 2 1/2 - 39 19 1/2 1 1/2 8 2 281
20 13500 1 7/8 3 4 42 21 2 8 3/4 2 1/2 429
24 13500 1 7/8 3 4 45 22 1/2 2 10 3/4 2 1/2 465
  1. All dimensions are in inches.
  2. The stated Maximum Loads are based upon the use of the clamp as a rigid support. Use of the clamp with Spring units will double the given Maximum Loads. 

Installation Drawings

Figure 40 Installation Drawing

Product Details

MATERIAL Hot Dipped Galvanized Carbon Steel
MAX TEMP 450F (232C)
COMPLIANCE Federal Specification A-A-1191A (Type 42), ANSI/MSS SP-58 (Type 42)
NOTE If different loads or dimensions are required, use Fig. 40 SD special design riser clamp.