Skip to main content

Red Rubber Full Face Gasket

Selected Red Rubber Full Face Gasket1 300#/400#/600# 1/8 Red Rubber 75 Durometer +/- 5 Full Face Gasket
Red Rubber Full Face Gasket1 300#/400#/600# 1/8 Red Rubber 75 Durometer +/- 5 Full Face Gasket

Full Face gaskets are a flat sealing element, consisting of an inner and outer diameter, and a specified number of bolt holes, the center of which are evenly spaced around a bolt circle. Full face gaskets are designed to fill the entire space between flat-faced flanges, with bolt holes that match the size and arrangement of the bolt holes in the intended flanges. ASME B16.21 and ASME B16.47 govern the dimensions of full face gaskets for standard and large diameter pipe flanges. 75 durometer SBR rubber is a synthetic polymer, commonly known as "Red Rubber". SBR is a copolymer of styrene and butadiene and has properties similar to natural rubber. It is a widely used because it is inexpensive and has the ability to deform to uneven flange edges. SBR has excellent impact-strength, abrasion resistance, heat resistance, and sustains flexibility at lower temperatures. Even though SBR is not resistant to oil, gasoline, and hydrocarbon solvents, it performs well in industrial applications which involve contact with chemicals, water, air and steam.

Products

Dimensional Specifications

Per ASME B16.21-2016
  Pipe Diameter
1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 24
Inside Diameter 0.84 1.06 1.31 1.66 1.91 2.38 2.88 3.50 4.00 4.50 5.56 6.62 8.62 10.75 12.75 14.00 16.00 18.00 20.00 24.00
Outside
Diameter
per Class		 150# 3.50 3.88 4.25 4.63 5.00 6.00 7.00 7.50 8.50 9.00 10.00 11.00 13.50 16.00 19.00 21.00 23.50 25.00 27.50 32.00
300# 3.75 4.62 4.88 5.25 6.12 6.50 7.50 8.25 9.00 10.00 11.00 12.50 15.00 17.50 20.50 23.00 25.50 28.00 30.50 36.00
600# 3.75 4.62 4.88 5.25 6.12 6.50 7.50 8.25 9.00 10.75 13.00 14.00 16.50 20.00 22.00 23.75 27.00 29.25 32.00 37.00
Bolt Circle
Diameter
per Class		 150# 2.38 2.75 3.13 3.50 3.88 4.75 5.50 6.00 7.00 7.50 8.50 9.50 11.75 14.25 17.00 18.75 21.25 22.75 25.00 29.50
300# 2.62 3.25 3.50 3.88 4.50 5.00 5.88 6.62 7.25 7.88 9.25 10.62 13.00 15.25 17.75 20.25 22.50 24.75 27.00 32.00
600# 2.62 3.25 3.50 3.88 4.50 5.00 5.88 6.62 7.25 8.50 10.50 11.50 13.75 17.00 19.25 20.75 23.75 25.75 28.50 33.00
Number of
Bolt Holes
per Class		 150# 4 4 4 4 4 4 4 4 8 8 8 8 8 12 12 12 16 16 20 20
300# 4 4 4 4 4 8 8 8 8 8 8 12 12 16 16 20 20 24 24 24
600# 4 4 4 4 4 8 8 8 8 8 8 12 12 16 20 20 20 20 24 24
Bolt Hole
Diameter
per Class		 150# 0.63 0.63 0.63 0.63 0.63 0.75 0.75 0.75 0.75 0.75 0.88 0.88 0.88 1.00 1.00 1.13 1.13 1.25 1.25 1.38
300# 0.63 0.75 0.75 0.75 0.88 0.75 0.88 0.88 0.88 0.88 0.88 0.88 1.00 1.12 1.25 1.25 1.38 1.38 1.38 1.62
600# 0.63 0.75 0.75 0.75 0.88 0.75 0.88 0.88 1.00 1.00 1.12 1.12 1.25 1.38 1.38 1.50 1.62 1.75 1.75 2.00
Per ASME B16.47-2017
Series A Pipe Diameter
26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
Inside Diameter 26.00 28.00 30.00 32.00 34.00 36.00 38.00 40.00 42.00 44.00 46.00 48.00 50.00 52.00 54.00 56.00 58.00 60.00
Outside
Diameter
per Class		 150# 34.25 36.50 38.75 41.75 43.75 46.00 48.75 50.75 53.00 55.25 57.25 59.50 61.75 64.00 66.25 68.75 71.00 73.00
300# 38.25 40.75 43.00 45.25 47.50 50.00 46.00 48.75 50.75 53.25 55.75 57.75 60.25 62.25 65.25 67.25 69.25 71.25
600# 40.00 42.25 44.50 47.00 49.00 51.75 50.00 52.00 55.25 57.25 59.50 62.75 65.75 67.75 70.00 73.00 75.00 78.50
Bolt Circle
Diameter
per Class		 150# 31.75 34.00 36.00 38.50 40.50 42.75 45.25 47.25 49.50 51.75 53.75 56.00 58.25 60.50 62.75 65.00 67.25 69.25
300# 34.50 37.00 39.25 41.50 43.50 46.00 43.00 45.50 47.50 49.75 52.00 54.00 56.25 58.25 61.00 63.00 65.00 67.00
600# 36.00 38.00 40.25 42.50 44.50 47.00 45.75 47.75 50.50 52.50 54.75 57.50 60.00 62.00 64.25 66.75 68.75 71.75
Number of
Bolt Holes
per Class		 150# 24 28 28 28 32 32 32 36 36 40 40 44 44 44 44 48 48 52
300# 28 28 28 28 28 32 32 32 32 32 28 32 32 32 28 28 32 32
600# 28 28 28 28 28 28 28 32 28 32 32 32 28 32 32 32 32 28
Bolt Hole
Diameter
per Class		 150# 1.38 1.38 1.38 1.63 1.63 1.63 1.63 1.63 1.63 1.63 1.63 1.63 1.88 1.88 1.88 1.88 1.88 1.88
300# 1.75 1.75 1.88 2.00 2.00 2.12 1.62 1.75 1.75 1.88 2.00 2.00 2.12 2.12 2.38 2.38 2.38 2.38
600# 2.00 2.12 2.12 2.38 2.38 2.62 2.38 2.38 2.62 2.62 2.62 2.88 3.12 3.12 3.12 3.38 3.38 3.62
Per ASME B16.47-2017
Series B Pipe Diameter
26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
Inside Diameter 26.00 28.00 30.00 32.00 34.00 36.00 38.00 40.00 42.00 44.00 46.00 48.00 50.00 52.00 54.00 56.00 58.00 60.00
Outside
Diameter
per Class		 150# 30.94 32.94 34.94 37.06 39.56 41.62 44.25 46.25 48.25 50.25 52.81 54.81 56.81 58.81 61.00 63.00 65.94 67.94
300# 34.12 36.25 39.00 41.50 43.62 46.12 48.12 50.12 52.50 54.50 57.50 59.50 61.50 63.50 65.88 69.50 71.94 73.94
600# 35.00 37.50 40.25 42.75 45.75 47.75                        
Bolt Circle
Diameter
per Class		 150# 29.31 31.31 33.31 35.44 37.69 39.75 42.12 44.12 46.12 48.12 50.56 52.56 54.56 56.56 58.75 60.75 63.44 65.44
300# 31.62 33.75 36.25 38.50 40.62 42.88 44.88 46.88 49.00 51.00 53.75 55.75 57.75 59.75 62.12 65.00 67.44 69.44
600# 31.75 34.00 36.50 38.75 41.50 43.50                        
Number of
Bolt Holes
per Class		 150# 36 40 44 48 40 44 40 44 48 52 40 44 48 52 56 60 48 52
300# 32 36 36 32 36 32 36 40 36 40 36 40 44 48 48 36 40 40
600# 28 28 28 28 24 28                        
Bolt Hole
Diameter
per Class		 150# 0.88 0.88 0.88 0.88 1.00 1.00 1.12 1.12 1.12 1.12 1.25 1.25 1.25 1.25 1.25 1.25 1.38 1.38
300# 1.38 1.38 1.50 1.62 1.62 1.75 1.75 1.75 1.88 1.88 2.00 2.00 2.00 2.00 2.00 2.38 2.38 2.38
600# 1.75 1.88 2.00 2.12 2.38 2.38                        
  1. All dimensions are in inches.

Physical Properties

Typical Physical Properties:
Dimension 1/8"
Hardness (shore A) 75 +/- 5
Density (g/cm3) 1.70
Tensile Strength (mpa) 2.50
Elongation (%) 180
Temperature -22F to 212F (-30C to 100C)

Governing Standards

ASME B16.21 Covers types, sizes, materials, dimensions, tolerances, and markings for nonmetallic flat gaskets.
ASME B16.47 Covers pressure-temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges in sizes NPS 26 through NPS 60. Included are flanges with rating class designations 75, 150, 300, 400, 600, and 900 with requirements given in both SI (Metric) and U. S. Customary units, with diameter of bolts and flange bolt hole expressed in inch units.