Teadit 1001 Full Face Gasket

Full Face gaskets are a flat sealing element, consisting of an inner and outer diameter, and a specified number of bolt holes, the center of which are evenly spaced around a bolt circle. Full face gaskets are designed to fill the entire space between flat-faced flanges, with bolt holes that match the size and arrangement of the bolt holes in the intended flanges. ASME B16.21 and ASME B16.47 govern the dimensions of full face gaskets for standard and large diameter pipe flanges. Teadit NA 1001 is a compressed non-asbestos sheet gasket material produced from a combination of aramid and other synthetic fibers and bonded with nitrile rubber (NBR). It is manufactured through the hot calendar process under rigorous quality control standards that are registered under ISO-9001 certification. NA1001 is a very good general service gasket material that has numerous applications in the process industries and in the water and wastewater industry. It is also commonly used in equipment such as valves and pumps.

Technical Data

Governing StandardsTeadit 1001 Full Face Gasket

ASME B16.21	Covers types, sizes, materials, dimensions, tolerances, and markings for nonmetallic flat gaskets.
ASME B16.47	Covers pressure-temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges in sizes NPS 26 through NPS 60. Included are flanges with rating class designations 75, 150, 300, 400, 600, and 900 with requirements given in both SI (Metric) and U. S. Customary units, with diameter of bolts and flange bolt hole expressed in inch units.

Service LimitsTeadit 1001 Full Face Gasket

Temperature	Continuous Service: 464F (240C)
	Maximum Service: 750F (400C)
Pressure	Continuous Service: 725 psi (50 bar)
	Maximum Service: 1595 psi (110 bar)
ASTM Line Call Out F104	F712120E22M5

Physical PropertiesTeadit 1001 Full Face Gasket

Typical Physical Properties:
Color			Green - NA1001G
Density			109 lb/ft^3 (1.75 g/cm^3)
Compressibility - ASTM F36 J			7-17%
Recovery - ASTM F36 J			min 45%
Tensile Strength Across Grain - ASTM F38			1670psi (11.5 N/mm^2)
Ignition Loss - ASTM F495			max 34%
Thickness Increase - ASTM F146 - after 5hr
ASTM IRM 903 @ 300F (150C)			max 12%
ASTM Fuel B @ 77F (25C)			max 10%
Weight Increase - ASTM F146 - after 5hr
ASTM IRM 903 @ 300F (150C)			max 15%
ASTM Fuel B @ 77F (25C)			max 15%
Creep Relaxation - ASTM F38			25%
Torque Retention (DIN 52913)			28N/mm^2
Sealability @ 1000psi - ASTM F37			max 0.25 ml/hr

Dimensional SpecificationsTeadit 1001 Full Face Gasket

Per ASME B16.21-2016
		Pipe Diameter
		1/2	3/4	1	1 1/4	1 1/2	2	2 1/2	3	3 1/2	4	5	6	8	10	12	14	16	18	20	24
Inside Diameter		0.84	1.06	1.31	1.66	1.91	2.38	2.88	3.50	4.00	4.50	5.56	6.62	8.62	10.75	12.75	14.00	16.00	18.00	20.00	24.00
Outside Diameter per Class	150#	3.50	3.88	4.25	4.63	5.00	6.00	7.00	7.50	8.50	9.00	10.00	11.00	13.50	16.00	19.00	21.00	23.50	25.00	27.50	32.00
	300#	3.75	4.62	4.88	5.25	6.12	6.50	7.50	8.25	9.00	10.00	11.00	12.50	15.00	17.50	20.50	23.00	25.50	28.00	30.50	36.00
	600#	3.75	4.62	4.88	5.25	6.12	6.50	7.50	8.25	9.00	10.75	13.00	14.00	16.50	20.00	22.00	23.75	27.00	29.25	32.00	37.00
Bolt Circle Diameter per Class	150#	2.38	2.75	3.13	3.50	3.88	4.75	5.50	6.00	7.00	7.50	8.50	9.50	11.75	14.25	17.00	18.75	21.25	22.75	25.00	29.50
	300#	2.62	3.25	3.50	3.88	4.50	5.00	5.88	6.62	7.25	7.88	9.25	10.62	13.00	15.25	17.75	20.25	22.50	24.75	27.00	32.00
	600#	2.62	3.25	3.50	3.88	4.50	5.00	5.88	6.62	7.25	8.50	10.50	11.50	13.75	17.00	19.25	20.75	23.75	25.75	28.50	33.00
Number of Bolt Holes per Class	150#	4	4	4	4	4	4	4	4	8	8	8	8	8	12	12	12	16	16	20	20
	300#	4	4	4	4	4	8	8	8	8	8	8	12	12	16	16	20	20	24	24	24
	600#	4	4	4	4	4	8	8	8	8	8	8	12	12	16	20	20	20	20	24	24
Bolt Hole Diameter per Class	150#	0.63	0.63	0.63	0.63	0.63	0.75	0.75	0.75	0.75	0.75	0.88	0.88	0.88	1.00	1.00	1.13	1.13	1.25	1.25	1.38
	300#	0.63	0.75	0.75	0.75	0.88	0.75	0.88	0.88	0.88	0.88	0.88	0.88	1.00	1.12	1.25	1.25	1.38	1.38	1.38	1.62
	600#	0.63	0.75	0.75	0.75	0.88	0.75	0.88	0.88	1.00	1.00	1.12	1.12	1.25	1.38	1.38	1.50	1.62	1.75	1.75	2.00

Per ASME B16.47-2017
Series A		Pipe Diameter
Series A		26	28	30	32	34	36	38	40	42	44	46	48	50	52	54	56	58	60
Inside Diameter		26.00	28.00	30.00	32.00	34.00	36.00	38.00	40.00	42.00	44.00	46.00	48.00	50.00	52.00	54.00	56.00	58.00	60.00
Outside Diameter per Class	150#	34.25	36.50	38.75	41.75	43.75	46.00	48.75	50.75	53.00	55.25	57.25	59.50	61.75	64.00	66.25	68.75	71.00	73.00
	300#	38.25	40.75	43.00	45.25	47.50	50.00	46.00	48.75	50.75	53.25	55.75	57.75	60.25	62.25	65.25	67.25	69.25	71.25
	600#	40.00	42.25	44.50	47.00	49.00	51.75	50.00	52.00	55.25	57.25	59.50	62.75	65.75	67.75	70.00	73.00	75.00	78.50
Bolt Circle Diameter per Class	150#	31.75	34.00	36.00	38.50	40.50	42.75	45.25	47.25	49.50	51.75	53.75	56.00	58.25	60.50	62.75	65.00	67.25	69.25
	300#	34.50	37.00	39.25	41.50	43.50	46.00	43.00	45.50	47.50	49.75	52.00	54.00	56.25	58.25	61.00	63.00	65.00	67.00
	600#	36.00	38.00	40.25	42.50	44.50	47.00	45.75	47.75	50.50	52.50	54.75	57.50	60.00	62.00	64.25	66.75	68.75	71.75
Number of Bolt Holes per Class	150#	24	28	28	28	32	32	32	36	36	40	40	44	44	44	44	48	48	52
	300#	28	28	28	28	28	32	32	32	32	32	28	32	32	32	28	28	32	32
	600#	28	28	28	28	28	28	28	32	28	32	32	32	28	32	32	32	32	28
Bolt Hole Diameter per Class	150#	1.38	1.38	1.38	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.88	1.88	1.88	1.88	1.88	1.88
	300#	1.75	1.75	1.88	2.00	2.00	2.12	1.62	1.75	1.75	1.88	2.00	2.00	2.12	2.12	2.38	2.38	2.38	2.38
	600#	2.00	2.12	2.12	2.38	2.38	2.62	2.38	2.38	2.62	2.62	2.62	2.88	3.12	3.12	3.12	3.38	3.38	3.62
Per ASME B16.47-2017
Series B		Pipe Diameter
Series B		26	28	30	32	34	36	38	40	42	44	46	48	50	52	54	56	58	60
Inside Diameter		26.00	28.00	30.00	32.00	34.00	36.00	38.00	40.00	42.00	44.00	46.00	48.00	50.00	52.00	54.00	56.00	58.00	60.00
Outside Diameter per Class	150#	30.94	32.94	34.94	37.06	39.56	41.62	44.25	46.25	48.25	50.25	52.81	54.81	56.81	58.81	61.00	63.00	65.94	67.94
	300#	34.12	36.25	39.00	41.50	43.62	46.12	48.12	50.12	52.50	54.50	57.50	59.50	61.50	63.50	65.88	69.50	71.94	73.94
	600#	35.00	37.50	40.25	42.75	45.75	47.75
Bolt Circle Diameter per Class	150#	29.31	31.31	33.31	35.44	37.69	39.75	42.12	44.12	46.12	48.12	50.56	52.56	54.56	56.56	58.75	60.75	63.44	65.44
	300#	31.62	33.75	36.25	38.50	40.62	42.88	44.88	46.88	49.00	51.00	53.75	55.75	57.75	59.75	62.12	65.00	67.44	69.44
	600#	31.75	34.00	36.50	38.75	41.50	43.50
Number of Bolt Holes per Class	150#	36	40	44	48	40	44	40	44	48	52	40	44	48	52	56	60	48	52
	300#	32	36	36	32	36	32	36	40	36	40	36	40	44	48	48	36	40	40
	600#	28	28	28	28	24	28
Bolt Hole Diameter per Class	150#	0.88	0.88	0.88	0.88	1.00	1.00	1.12	1.12	1.12	1.12	1.25	1.25	1.25	1.25	1.25	1.25	1.38	1.38
	300#	1.38	1.38	1.50	1.62	1.62	1.75	1.75	1.75	1.88	1.88	2.00	2.00	2.00	2.00	2.00	2.38	2.38	2.38
	600#	1.75	1.88	2.00	2.12	2.38	2.38

All dimensions are in inches.

Teadit 1001 Full Face Gasket

of 1

Sort By

Show

View

Pipe Diameter	Flange Rating	Series	Thickness	Item #	Availability	Price	Quantity
1/2	150#	-	1/16	GF1001-1500050	In Stock	$0.84116/EA	EA	EA
1/2	300#, 400#, 600#	-	1/16	GF1001-3460050	1-3 Working Days	$0.96562/EA	EA	EA
3/4	150#	-	1/16	GF1001-1500075	In Stock	$1.03107/EA	EA	EA
3/4	300#, 400#, 600#	-	1/16	GF1001-3460075	1-3 Working Days	$1.46881/EA	EA	EA
1	150#	-	1/16	GF1001-1500100	In Stock	$1.24028/EA	EA	EA
1	300#, 400#, 600#	-	1/16	GF1001-3460100	1-3 Working Days	$1.6319/EA	EA	EA
1 1/4	150#	-	1/16	GF1001-1500125	1-3 Working Days	$1.46881/EA	EA	EA
1 1/4	300#, 400#, 600#	-	1/16	GF1001-3460125	1-3 Working Days	$1.89261/EA	EA	EA
1 1/2	150#	-	1/16	GF1001-1500150	In Stock	$1.71666/EA	EA	EA
1 1/2	300#, 400#, 600#	-	1/16	GF1001-3460150	1-3 Working Days	$2.57606/EA	EA	EA
2	150#	-	1/16	GF1001-1500200	In Stock	$2.47198/EA	EA	EA
2	300#, 400#, 600#	-	1/16	GF1001-3460200	1-3 Working Days	$2.90115/EA	EA	EA
2 1/2	150#	-	1/16	GF1001-1500250	In Stock	$3.36465/EA	EA	EA
3	150#	-	1/16	GF1001-1500300	In Stock	$3.02131/EA	EA	EA
3	300#, 400#, 600#	-	1/16	GF1001-3460300	1-3 Working Days	$3.83243/EA	EA	EA
4	150#	-	1/16	GF1001-1500400	In Stock	$4.17147/EA	EA	EA
4	300#	-	1/16	GF1001-3000400	1-3 Working Days	$5.47613/EA	EA	EA
5	150#	-	1/16	GF1001-1500500	In Stock	$4.74199/EA	EA	EA
6	150#	-	1/16	GF1001-1500600	In Stock	$5.29481/EA	EA	EA
6	300#	-	1/16	GF1001-3000600	1-3 Working Days	$7.7153/EA	EA	EA
8	150#	-	1/16	GF1001-1500800	In Stock	$7.4063/EA	EA	EA
8	300#	-	1/16	GF1001-3000800	1-3 Working Days	$10.34178/EA	EA	EA
10	150#	-	1/16	GF1001-1501000	In Stock	$9.64332/EA	EA	EA
10	300#	-	1/16	GF1001-3001000	1-3 Working Days	$13.09379/EA	EA	EA
12	150#	-	1/16	GF1001-1501200	In Stock	$13.62596/EA	EA	EA
12	300#	-	1/16	GF1001-3001200	1-3 Working Days	$17.69443/EA	EA	EA
14	150#	-	1/16	GF1001-1501400	1-3 Working Days	$16.82323/EA	EA	EA
14	300#	-	1/16	GF1001-3001400	1-3 Working Days	$22.86586/EA	EA	EA
16	150#	-	1/16	GF1001-1501600	1-3 Working Days	$20.34237/EA	EA	EA
16	300#	-	1/16	GF1001-3001600	1-3 Working Days	$27.07166/EA	EA	EA
18	150#	-	1/16	GF1001-1501800	1-3 Working Days	$20.66854/EA	EA	EA
18	300#	-	1/16	GF1001-3001800	1-3 Working Days	$31.58647/EA	EA	EA
20	150#	-	1/16	GF1001-1502000	In Stock	$24.46235/EA	EA	EA
20	300#	-	1/16	GF1001-3002000	1-3 Working Days	$36.41027/EA	EA	EA
24	150#	-	1/16	GF1001-1502400	1-3 Working Days	$30.76248/EA	EA	EA
24	300#	-	1/16	GF1001-3002400	1-3 Working Days	$49.43969/EA	EA	EA
1/2	150#	-	1/8	GF1001-1500050-1/8	1-3 Working Days	$1.5578/EA	EA	EA
1/2	300#, 400#, 600#	-	1/8	GF1001-3460050-1/8	1-3 Working Days	$1.78829/EA	EA	EA
3/4	150#	-	1/8	GF1001-1500075-1/8	In Stock	$1.90949/EA	EA	EA
3/4	300#, 400#, 600#	-	1/8	GF1001-3460075-1/8	In Stock	$2.72019/EA	EA	EA
1	150#	-	1/8	GF1001-1500100-1/8	In Stock	$2.29696/EA	EA	EA
1	300#, 400#, 600#	-	1/8	GF1001-3460100-1/8	1-3 Working Days	$3.02221/EA	EA	EA
1 1/4	150#	-	1/8	GF1001-1500125-1/8	1-3 Working Days	$2.72019/EA	EA	EA
1 1/4	300#, 400#, 600#	-	1/8	GF1001-3460125-1/8	1-3 Working Days	$3.50505/EA	EA	EA
1 1/2	150#	-	1/8	GF1001-1500150-1/8	In Stock	$3.17918/EA	EA	EA
1 1/2	300#, 400#, 600#	-	1/8	GF1001-3460150-1/8	1-3 Working Days	$4.77076/EA	EA	EA
2	150#	-	1/8	GF1001-1500200-1/8	In Stock	$4.57802/EA	EA	EA
2	300#, 400#, 600#	-	1/8	GF1001-3460200-1/8	1-3 Working Days	$5.37281/EA	EA	EA
2 1/2	150#	-	1/8	GF1001-1500250-1/8	In Stock	$6.23119/EA	EA	EA
3	150#	-	1/8	GF1001-1500300-1/8	In Stock	$5.59536/EA	EA	EA
3	300#, 400#, 600#	-	1/8	GF1001-3460300-1/8	1-3 Working Days	$7.09752/EA	EA	EA
4	150#	-	1/8	GF1001-1500400-1/8	In Stock	$7.72541/EA	EA	EA
4	300#	-	1/8	GF1001-3000400-1/8	1-3 Working Days	$10.14158/EA	EA	EA
5	150#	-	1/8	GF1001-1500500-1/8	In Stock	$8.78199/EA	EA	EA
6	150#	-	1/8	GF1001-1500600-1/8	In Stock	$9.80578/EA	EA	EA
6	300#	-	1/8	GF1001-3000600-1/8	1-3 Working Days	$14.28843/EA	EA	EA
8	150#	-	1/8	GF1001-1500800-1/8	In Stock	$13.71617/EA	EA	EA
8	300#	-	1/8	GF1001-3000800-1/8	1-3 Working Days	$19.15257/EA	EA	EA
10	150#	-	1/8	GF1001-1501000-1/8	In Stock	$17.85904/EA	EA	EA
10	300#	-	1/8	GF1001-3001000-1/8	In Stock	$24.24919/EA	EA	EA
12	150#	-	1/8	GF1001-1501200-1/8	In Stock	$25.23474/EA	EA	EA
12	300#	-	1/8	GF1001-3001200-1/8	1-3 Working Days	$32.76939/EA	EA	EA
14	150#	-	1/8	GF1001-1501400-1/8	1-3 Working Days	$31.15596/EA	EA	EA
14	300#	-	1/8	GF1001-3001400-1/8	1-3 Working Days	$42.34667/EA	EA	EA
16	150#	-	1/8	GF1001-1501600-1/8	1-3 Working Days	$37.67328/EA	EA	EA
16	300#	-	1/8	GF1001-3001600-1/8	1-3 Working Days	$50.13566/EA	EA	EA
18	150#	-	1/8	GF1001-1501800-1/8	In Stock	$38.27732/EA	EA	EA
18	300#	-	1/8	GF1001-3001800-1/8	In Stock	$58.4969/EA	EA	EA
20	150#	-	1/8	GF1001-1502000-1/8	1-3 Working Days	$45.30331/EA	EA	EA
20	300#	-	1/8	GF1001-3002000-1/8	1-3 Working Days	$67.4304/EA	EA	EA
24	150#	-	1/8	GF1001-1502400-1/8	1-3 Working Days	$56.9709/EA	EA	EA
24	300#	-	1/8	GF1001-3002400-1/8	1-3 Working Days	$91.56037/EA	EA	EA

Teadit 1001 Full Face Gasket

Technical Data

Tab 1

Governing StandardsTeadit 1001 Full Face Gasket

Tab 2

Service LimitsTeadit 1001 Full Face Gasket

Tab 3

Physical PropertiesTeadit 1001 Full Face Gasket

Tab 4

Dimensional SpecificationsTeadit 1001 Full Face Gasket

Product Specification

Pipe Diameter

Flange Rating

Thickness

Outside Diameter

Inside Diameter