Teadit 24Sh Ring Gasket

Manufacturers:

Ring gaskets are a flat sealing element, consisting of an inner and outer diameter sized to fit a flange's bore and bolt circle. Ring gaskets sit inside the flange's bolt circle. ASME B16.21 and ASME B16.47 govern the dimensions of ring gaskets for standard and large diameter pipe flanges. TEADIT 24SH is a large gasket sheet produced from 100% pure, multi-directionally expanded PTFE. Universally employable gasket sheet for all applications. It is suitable for all types of flanges, nearly all media, a wide temperature range and for applications with the toughest demands on purity. It is inherently clean and non-toxic. Gaskets of multi-directionally expanded PTFE have exceptional mechanical strength which allows operation with minimal creep at elevated temperatures. The excellent malleability of TEADIT 24SH makes repairing small damage and/or irregularities of the sealing area (flange surface) unnecessary. Gaskets cut from TEADIT 24SH are dimensionally stable, i. e. they do not get wider when compressed. This allows narrow flange faces to be sealed safely. TEADIT 24SH is quick and simple to install. The used gasket can be removed easily and without residue.

Products

Loading algolia series attribute grid...

Governing Standards

ASME B16.21	Covers types, sizes, materials, dimensions, tolerances, and markings for nonmetallic flat gaskets.
ASME B16.47	Covers pressure-temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges in sizes NPS 26 through NPS 60. Included are flanges with rating class designations 75, 150, 300, 400, 600, and 900 with requirements given in both SI (Metric) and U. S. Customary units, with diameter of bolts and flange bolt hole expressed in inch units.

Physical Properties

Typical Physical Properties:
Color			White
Compressibility - ASTM F36M			45%
Recovery - ASTM F36M			14%
Tensile Strength Across Grain - ASTM F152			>20 MPa
Stress Retention - DIN 52913			15 MPa
Specific Leakage Rate L - VDI 2440 / TA LUFT			2.6E^(-7)

Dimensional Specifications

Per ASME B16.21-2016
		Pipe Diameter
		1/2	3/4	1	1 1/4	1 1/2	2	2 1/2	3	3 1/2	4	5	6	8	10	12	14	16	18	20	24
Inside Diameter		0.84	1.06	1.31	1.66	2.38	2.38	2.88	3.50	4.00	4.50	5.56	6.63	8.63	10.75	12.75	14.00	16.00	18.00	20.00	24.00
Outside Diameter per Class	150#	1.88	2.25	2.62	3.00	3.38	4.12	4.88	5.38	6.38	6.88	7.75	8.75	11.00	13.38	16.13	17.75	20.25	21.62	23.88	28.25
	300#	2.12	2.62	2.88	3.25	3.75	4.38	5.12	5.88	6.50	7.12	8.50	9.88	12.12	14.25	16.62	19.12	21.25	23.50	25.75	30.50
	600#	2.12	2.62	2.88	3.25	3.75	4.38	5.12	5.88	6.38	7.62	9.50	10.50	12.62	15.75	18.00	19.38	22.25	24.12	26.88	31.12

Per ASME B16.47-2017
Series A		Pipe Diameter
Series A		26	28	30	32	34	36	38	40	42	44	46	48	50	52	54	56	58	60
Inside Diameter		26.00	28.00	30.00	32.00	34.00	36.00	38.00	40.00	42.00	44.00	46.00	48.00	50.00	52.00	54.00	56.00	58.00	60.00
Outside Diameter per Class	150#	30.50	32.75	34.75	37.00	39.00	41.25	43.75	45.75	48.00	50.25	52.25	54.50	56.50	58.75	61.00	63.25	65.50	67.50
	300#	32.88	35.38	37.50	39.62	41.62	44.00	41.50	43.88	45.88	48.00	50.12	52.12	54.25	56.25	58.75	60.75	62.75	64.75
	600#	34.12	36.00	38.25	40.25	42.25	44.50	43.50	45.50	48.00	50.00	52.26	54.75	57.00	59.00	61.25	63.50	65.50	67.75
Per ASME B16.47-2017
Series B		Pipe Diameter
Series B		26	28	30	32	34	36	38	40	42	44	46	48	50	52	54	56	58	60
Inside Diameter		26.00	28.00	30.00	32.00	34.00	36.00	38.00	40.00	42.00	44.00	46.00	48.00	50.00	52.00	54.00	56.00	58.00	60.00
Outside Diameter per Class	150#	28.56	30.56	32.56	34.69	36.81	38.88	41.12	43.12	45.12	47.12	49.44	51.44	53.44	55.44	57.62	59.62	62.19	64.19
	300#	30.38	32.50	34.88	37.00	39.12	41.25	43.25	45.25	47.25	49.25	51.88	53.88	55.88	57.88	61.25	62.75	65.19	67.12
	600#	30.12	32.25	34.62	36.75	39.25	41.25

All dimensions are in inches.

Service Limits

Temperature	Minimum: -450F (-268C)
	Maximum Service: 500F (260C)
	Short Term Max: 600F (315C)
Pressure	Vacuum up to: 2900 psi (200 bar)
pH	0-14*
Density	0.9 g/cm^3

Loading product details...