5/8-11 X 12 Ft A307 All Thread Rod, Plated Domestic
5/8-11 X 12 Ft A307 All Thread Rod, Plated Domestic
Item #: RG2P0620000-U
Manufacturers:
Product Specification
| Diameter | 5/8 |
|---|---|
| Length | 12 FT |
| Grade | Grade A307 |
| With Nut? | Bolt Only |
| Material | Steel |
| Finish | Plated |
| Country of Origin | Domestic |
| Weight | 0.843000 |
Governing Standards
| ASTM A307 | Covers the mechanical and material requirements for inch series fasteners in diameters from 1/4″ through 4″, made of carbon steel having a minimum tensile strength of 60,000 psi. |
| ASME B18.31.3 | Covers the general and dimensional data for inch series threaded rods. |
| ASME B1.1 UNC & UNF Class 2A | Specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads. |
Chemical Properties
| Per ASTM A307-2014 | |||
| Carbon | Manganese | Phosphorus | Sulfur |
| % by heat analysis |
% by heat analysis |
% by heat analysis |
% by heat analysis |
| 0.29 | 1.20 | 0.04 | 0.15 |
Mechanical Properties
| Low Carbon Steel | Per ASTM A307-2014 | |||
| Diameter | Bolt or Stud Length | Tensile Strength |
Elongation | Core Hardness (1) |
| Min psi | Min % | Rockwell | ||
| 1/4 thru 4" | Less than 3 X dia (2) | 60,000 | 18 | B69 to B100 |
| 3 X dia and longer | 60,000 | 18 | B100 | |
- 1. As measured anywhere on the surface or through the cross section.
- 2. Also bolts with drilled or undersized heads. These sizes and bolts with modified heads shall meet the minimum and maximum hardness as hardness is the only requirement.
