Skip to main content

Fig B212 Medium Pipe Clamp

Selected Figure B212 Medium Pipe Clamp Black OxideFig B212 Medium Pipe Clamp
Figure B212 Medium Pipe Clamp Black OxideFig B212 Medium Pipe Clamp

The figure B212 carbon steel medium pipe clamp is designed to suspend cold or hot pipe lines where little or no insulation is required. The Fig. B212 medium pipe clamp is usually used with a Fig. B290 weldless eyenut or a Fig. B278 welded eye rod.

Products

Installation Drawings

Figure 212 Installation Drawing

Figure 212 Installation Drawing

Figure 212 Installation Drawing

Figure 212 Installation Drawing

Dimensions & Loads

Figure 212 Medium Pipe ClampFigure 212 Medium Pipe Clamp
Figure 212 Medium Pipe Clamp

PIPE SIZE MAXIMUM LOAD C D E F WEIGHT EA
650F (343 C) 750F (399C)
1/2 500 445 3/8 1 1/8 1 5/8 3/8 0.31
3/4 500 445 3/8 1 1/4 1 3/4 3/8 0.35
1 500 445 3/8 1 3/8 1 7/8 3/8 0.39
1 1/4 500 445 3/8 1 5/8 2 1/8 3/8 0.40
1 1/2 800 715 3/8 1 3/4 2 1/4 3/8 0.45
2 1040 930 1/2 2 1/8 2 3/4 1/2 1.23
2 1/2 1040 930 5/8 2 5/8 3 1/8 1/2 1.33
3 1040 930 5/8 3 3 5/8 1/2 1.53
4 1040 930 3/4 3 5/8 4 3/8 1/2 2.20
5 1040 930 3/4 4 1/4 5 1/2 2.39
6 1615 1440 7/8 5 1/4 6 1/4 3/4 5.87
8 1615 1440 1 6 3/8 7 3/8 3/4 6.95
10 2490 2220 1 7 5/8 8 3/4 7/8 14.39
12 2490 2220 1 8 3/4 10 1/4 7/8 16.73
14 2490 2220 1 1/8 9 1/4 10 5/8 7/8 21.26
16 2490 2220 1 1/8 10 1/4 11 5/8 7/8 23.39
18 3060 2730 1 1/4 11 5/8 13 1 32.96
20 3060 2730 1 3/8 12 3/4 14 1/8 1 1/8 36.74
24 3060 2730 1 1/2 15 1/4 16 7/8 1 1/4 52.96
30 3500 3360 2 18 1/2 20 3/4 1 1/2 103.50
  1. All dimensions are in inches.

Product Details

MATERIAL Carbon Steel
MAX TEMP 750F (399C)
COMPLIANCE Federal Specification A-A-1192A (Type 4), ANSI/MSS SP-58 (Type 4)
NOTE The “C” gap dimension ensures adequate clearance at the top attachment point for a weldless eye nut or other appropriate rod attachment. This gap may or may not be present on the bottom portion of the clamp. If different loads or dimensions are required, refer to non-standard two bolt pipe clamp.