Skip to main content

Phillips Flat Head Self Tapping Screw, Plated

Selected Phillips Flat Head Self Tapping Screw Type A PlatedPhillips Flat Head Self Tapping Screw, Plated
Phillips Flat Head Self Tapping Screw Type A PlatedPhillips Flat Head Self Tapping Screw, Plated

Self-tapping screws are fasteners that have a tapered point allowing the screw to thread itself into a pre-drilled hole, though some softer materials may not require pre-drilling. Type A self-tapping screws have coarse threads suitable for use in thin metal, composites, and wood in many cases. The threads taper down to the point, allowing the screw to form threads into the material as the screw is installed. Type A screws are often referred to as sheet metal screws, though they are not a self-drilling tek screw. The phillips flat head offers a countersunk design to allow for flush installation. Phillips flat head countersunk type A self-tapping screws listed here have a zinc plated finish for added corrosion protection. 

Products

Dimensional Specifications

Type A Threads for Self Tapping Screws dimensions
ASME B18.6.3-2013
Nominal Size
or Basic Screw
Diameter		 Threads
per Inch		 D d Drill
Size		 Recommended
Hole Diameter
Major
Diameter		 Minor
Diameter
Max Min Max Min
#0 0.060 40 0.060 0.057 0.042 0.039    
#1 0.073 32 0.075 0.072 0.051 0.048    
#2 0.086 32 0.088 0.084 0.061 0.056 #48 0.0760
#3 0.099 28 0.101 0.097 0.076 0.071 #46 0.0810
#4 0.112 24 0.114 0.110 0.083 0.078 #44 0.0860
#5 0.125 20 0.130 0.126 0.095 0.090 #36 0.1065
#6 0.138 18 0.141 0.136 0.102 0.096 #32 0.1160
#7 0.151 16 0.158 0.152 0.114 0.108 #30 0.1285
#8 0.164 15 0.168 0.162 0.123 0.116 #29 0.1360
#10 0.190 12 0.194 0.188 0.133 0.126 #21 0.1590
#12 0.216 11 0.221 0.215 0.162 0.155 3/16 0.1875
#14 0.242 10 0.254 0.248 0.185 0.178 7/32 0.2165
  1. Tolerance on Length: Up to 1" incl.: +/- 0.03. Over 1": +/- 0.05.
  2. All dimensions are in inches.
Phillips Flat Head for Self-Tapping Screws dimensionsPhillips Flat Head for Self-Tapping Screws dimensions
ASME B18.6.3-2013
Nominal
Size		 A H M R N F G Phillips
Drive
Size
Head Dimensions Phillips Dimensions Protrusion
Above
Gaging
Diameter		 Gaging
Diameter
Diameter Height Diam. Depth Width
Max Min Max Min Max Min
#0 0.112 0.096 0.035 0.026 0.062 0.035 0.014 0.026 0.016 0.078 0
#1 0.137 0.120 0.043 0.033 0.070 0.043 0.015 0.028 0.016 0.101 0
#2 0.162 0.144 0.051 0.040 0.096 0.055 0.017 0.029 0.017 0.124 1
#3 0.187 0.167 0.061 0.047 0.100 0.060 0.018 0.031 0.017 0.148 1
#4 0.212 0.191 0.067 0.055 0.122 0.081 0.018 0.032 0.018 0.172 1
#5 0.237 0.215 0.075 0.062 0.148 0.074 0.027 0.034 0.019 0.196 2
#6 0.262 0.238 0.083 0.069 0.168 0.094 0.029 0.036 0.020 0.220 2
#7 0.287 0.262 0.091 0.076 0.176 0.102 0.030 0.037 0.021 0.243 2
#8 0.312 0.285 0.100 0.084 0.182 0.110 0.030 0.039 0.022 0.267 2
#10 0.362 0.333 0.116 0.098 0.198 0.124 0.032 0.042 0.023 0.313 2
#12 0.412 0.380 0.132 0.112 0.262 0.144 0.035 0.045 0.025 0.362 3
#14 0.462 0.427 0.148 0.126 0.276 0.160 0.036 0.049 0.027 0.410 3
  1. All dimensions are in inches.