Skip to main content

How do threaded repair inserts work?

Threaded repair inserts work by drilling out a stripped hole, cutting a larger thread, and installing an insert that carries the original thread size on its inside. The original bolt or stud then threads into the insert. This saves castings, housings, and equipment that would otherwise be scrapped over one damaged hole.

There are two main styles. Coil inserts are formed from diamond shaped wire. Solid threaded inserts are machined steel bushings with threads inside and out.

How Coil Thread Repair Inserts Install

A coil thread repair kit includes a drill, a special tap, an installation tool, and inserts. The process follows four steps.

  • Drill out the damaged threads with the drill size listed for the kit.
  • Tap the hole with the STI tap included in the kit.
  • Thread the insert in with the installation tool until it sits below the surface.
  • Break off the drive tang with a punch and remove it, if the insert has one.

The STI tap is not a standard tap. Its threads match the insert's outer profile and run slightly larger than the bolt size. Free running coil inserts grip the hole by spring tension. Screw locking inserts have a deformed coil that grips the bolt threads to resist vibration, which suits pumps, motors, and other equipment that shakes.

How Solid Threaded Inserts Work

An E-Z Lock threaded insert for metal is a solid steel insert with a standard external thread. It installs with a standard drill and tap, so no special tap is required. The insert threads in like a fastener and is driven with a screwdriver, a bolt and jam nut, or a drive tool. These inserts suit soft metals such as aluminum and cast iron and holes that see repeated assembly.

Choosing a Repair Method

Coil inserts need less wall thickness and fit tight spaces near edges. Solid inserts take more material around the hole but give a heavier wall. Coil inserts are made in standard UNC, UNF, and metric sizes, so kits are sold by the original thread size of the bolt being repaired. If the bolt itself broke off in the hole, remove it first. See how to use a screw extractor.

STS Industrial Thread Repair Supply

STS Industrial stocks Thread Repair Coil Inserts and kits plus E-Z Lock Threaded Inserts for Metal in its bolt removal and thread repair line. For chasing threads that are only damaged, see taps and dies. Browse all cutting tools.

Repairing a stripped hole on equipment? Contact STS Industrial or call (855) 416-2658 to find the right kit size.