InstallationCoil Threaded Insert for Metal
![](https://assetcloud.roccommerce.net/_stsindustrial/2/4/6/e-z-coil-insert-installation-01.png)
1. Drill out the hole with the specified drill.
![](https://assetcloud.roccommerce.net/_stsindustrial/7/2/7/e-z-coil-insert-installation-02.png)
2. Confirm that the thread and pitch of the bolt match the tap.
![](https://assetcloud.roccommerce.net/_stsindustrial/9/6/2/e-z-coil-insert-installation-03.png)
3. Tap the hole with the specified tap.
![](https://assetcloud.roccommerce.net/_stsindustrial/8/7/7/e-z-coil-insert-installation-04.png)
4. Set the stop on the installation tool so the tang is centered in the slot.
![](https://assetcloud.roccommerce.net/_stsindustrial/4/2/1/e-z-coil-insert-installation-05.png)
5. Wind the insert into the hole with a slight downward pressure until 1/4 to 1/2 turn below the surface.
![](https://assetcloud.roccommerce.net/_stsindustrial/4/10/2/e-z-coil-insert-installation-06.png)
6. Remove the tang by placing the tang break tool (or installation tool) on top of the tang and striking firmly with a hammer.