EPDM Full Face Gasket

Full Face gaskets are a flat sealing element, consisting of an inner and outer diameter, and a specified number of bolt holes, the center of which are evenly spaced around a bolt circle. Full face gaskets are designed to fill the entire space between flat-faced flanges, with bolt holes that match the size and arrangement of the bolt holes in the intended flanges. ASME B16.21 and ASME B16.47 govern the dimensions of full face gaskets for standard and large diameter pipe flanges. EPDM, Ethylene Propylene Diene Monomer, is an "M" class synthetic rubber elastomer. Relatively immune to sunlight, water and low temperatures, EPDM is often a smart choice for gaskets that will be outside. Good compression set resistance means it recovers well in applications where a joint may open up from time to time, and high electrical resistance means EPDM gaskets may be appropriate for some electrical installations.

Technical Data

Governing StandardsEPDM Full Face Gasket

ASME B16.21	Covers types, sizes, materials, dimensions, tolerances, and markings for nonmetallic flat gaskets.
ASME B16.47	Covers pressure-temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges in sizes NPS 26 through NPS 60. Included are flanges with rating class designations 75, 150, 300, 400, 600, and 900 with requirements given in both SI (Metric) and U. S. Customary units, with diameter of bolts and flange bolt hole expressed in inch units.

Physical PropertiesEPDM Full Face Gasket

Typical Physical Properties:
Dimension			1/8"
Hardness (shore A)			65
Density (g/cm3)			1.40
Tensile Strength (mpa)			4.50
Elongation (%)			300
Temperature			-4F to 284F (-20C to 140C)

Dimensional SpecificationsEPDM Full Face Gasket

Per ASME B16.21-2016
		Pipe Diameter
		1/2	3/4	1	1 1/4	1 1/2	2	2 1/2	3	3 1/2	4	5	6	8	10	12	14	16	18	20	24
Inside Diameter		0.84	1.06	1.31	1.66	1.91	2.38	2.88	3.50	4.00	4.50	5.56	6.62	8.62	10.75	12.75	14.00	16.00	18.00	20.00	24.00
Outside Diameter per Class	150#	3.50	3.88	4.25	4.63	5.00	6.00	7.00	7.50	8.50	9.00	10.00	11.00	13.50	16.00	19.00	21.00	23.50	25.00	27.50	32.00
	300#	3.75	4.62	4.88	5.25	6.12	6.50	7.50	8.25	9.00	10.00	11.00	12.50	15.00	17.50	20.50	23.00	25.50	28.00	30.50	36.00
	600#	3.75	4.62	4.88	5.25	6.12	6.50	7.50	8.25	9.00	10.75	13.00	14.00	16.50	20.00	22.00	23.75	27.00	29.25	32.00	37.00
Bolt Circle Diameter per Class	150#	2.38	2.75	3.13	3.50	3.88	4.75	5.50	6.00	7.00	7.50	8.50	9.50	11.75	14.25	17.00	18.75	21.25	22.75	25.00	29.50
	300#	2.62	3.25	3.50	3.88	4.50	5.00	5.88	6.62	7.25	7.88	9.25	10.62	13.00	15.25	17.75	20.25	22.50	24.75	27.00	32.00
	600#	2.62	3.25	3.50	3.88	4.50	5.00	5.88	6.62	7.25	8.50	10.50	11.50	13.75	17.00	19.25	20.75	23.75	25.75	28.50	33.00
Number of Bolt Holes per Class	150#	4	4	4	4	4	4	4	4	8	8	8	8	8	12	12	12	16	16	20	20
	300#	4	4	4	4	4	8	8	8	8	8	8	12	12	16	16	20	20	24	24	24
	600#	4	4	4	4	4	8	8	8	8	8	8	12	12	16	20	20	20	20	24	24
Bolt Hole Diameter per Class	150#	0.63	0.63	0.63	0.63	0.63	0.75	0.75	0.75	0.75	0.75	0.88	0.88	0.88	1.00	1.00	1.13	1.13	1.25	1.25	1.38
	300#	0.63	0.75	0.75	0.75	0.88	0.75	0.88	0.88	0.88	0.88	0.88	0.88	1.00	1.12	1.25	1.25	1.38	1.38	1.38	1.62
	600#	0.63	0.75	0.75	0.75	0.88	0.75	0.88	0.88	1.00	1.00	1.12	1.12	1.25	1.38	1.38	1.50	1.62	1.75	1.75	2.00

Per ASME B16.47-2017
Series A		Pipe Diameter
Series A		26	28	30	32	34	36	38	40	42	44	46	48	50	52	54	56	58	60
Inside Diameter		26.00	28.00	30.00	32.00	34.00	36.00	38.00	40.00	42.00	44.00	46.00	48.00	50.00	52.00	54.00	56.00	58.00	60.00
Outside Diameter per Class	150#	34.25	36.50	38.75	41.75	43.75	46.00	48.75	50.75	53.00	55.25	57.25	59.50	61.75	64.00	66.25	68.75	71.00	73.00
	300#	38.25	40.75	43.00	45.25	47.50	50.00	46.00	48.75	50.75	53.25	55.75	57.75	60.25	62.25	65.25	67.25	69.25	71.25
	600#	40.00	42.25	44.50	47.00	49.00	51.75	50.00	52.00	55.25	57.25	59.50	62.75	65.75	67.75	70.00	73.00	75.00	78.50
Bolt Circle Diameter per Class	150#	31.75	34.00	36.00	38.50	40.50	42.75	45.25	47.25	49.50	51.75	53.75	56.00	58.25	60.50	62.75	65.00	67.25	69.25
	300#	34.50	37.00	39.25	41.50	43.50	46.00	43.00	45.50	47.50	49.75	52.00	54.00	56.25	58.25	61.00	63.00	65.00	67.00
	600#	36.00	38.00	40.25	42.50	44.50	47.00	45.75	47.75	50.50	52.50	54.75	57.50	60.00	62.00	64.25	66.75	68.75	71.75
Number of Bolt Holes per Class	150#	24	28	28	28	32	32	32	36	36	40	40	44	44	44	44	48	48	52
	300#	28	28	28	28	28	32	32	32	32	32	28	32	32	32	28	28	32	32
	600#	28	28	28	28	28	28	28	32	28	32	32	32	28	32	32	32	32	28
Bolt Hole Diameter per Class	150#	1.38	1.38	1.38	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.63	1.88	1.88	1.88	1.88	1.88	1.88
	300#	1.75	1.75	1.88	2.00	2.00	2.12	1.62	1.75	1.75	1.88	2.00	2.00	2.12	2.12	2.38	2.38	2.38	2.38
	600#	2.00	2.12	2.12	2.38	2.38	2.62	2.38	2.38	2.62	2.62	2.62	2.88	3.12	3.12	3.12	3.38	3.38	3.62
Per ASME B16.47-2017
Series B		Pipe Diameter
Series B		26	28	30	32	34	36	38	40	42	44	46	48	50	52	54	56	58	60
Inside Diameter		26.00	28.00	30.00	32.00	34.00	36.00	38.00	40.00	42.00	44.00	46.00	48.00	50.00	52.00	54.00	56.00	58.00	60.00
Outside Diameter per Class	150#	30.94	32.94	34.94	37.06	39.56	41.62	44.25	46.25	48.25	50.25	52.81	54.81	56.81	58.81	61.00	63.00	65.94	67.94
	300#	34.12	36.25	39.00	41.50	43.62	46.12	48.12	50.12	52.50	54.50	57.50	59.50	61.50	63.50	65.88	69.50	71.94	73.94
	600#	35.00	37.50	40.25	42.75	45.75	47.75
Bolt Circle Diameter per Class	150#	29.31	31.31	33.31	35.44	37.69	39.75	42.12	44.12	46.12	48.12	50.56	52.56	54.56	56.56	58.75	60.75	63.44	65.44
	300#	31.62	33.75	36.25	38.50	40.62	42.88	44.88	46.88	49.00	51.00	53.75	55.75	57.75	59.75	62.12	65.00	67.44	69.44
	600#	31.75	34.00	36.50	38.75	41.50	43.50
Number of Bolt Holes per Class	150#	36	40	44	48	40	44	40	44	48	52	40	44	48	52	56	60	48	52
	300#	32	36	36	32	36	32	36	40	36	40	36	40	44	48	48	36	40	40
	600#	28	28	28	28	24	28
Bolt Hole Diameter per Class	150#	0.88	0.88	0.88	0.88	1.00	1.00	1.12	1.12	1.12	1.12	1.25	1.25	1.25	1.25	1.25	1.25	1.38	1.38
	300#	1.38	1.38	1.50	1.62	1.62	1.75	1.75	1.75	1.88	1.88	2.00	2.00	2.00	2.00	2.00	2.38	2.38	2.38
	600#	1.75	1.88	2.00	2.12	2.38	2.38

All dimensions are in inches.

EPDM Full Face Gasket

of 1

Sort By

Show

View

Pipe Diameter	Flange Rating	Series	Thickness	Item #	Availability	Price	Quantity
1/2	150#	-	1/8	GFEPDM-1500050-1/8	1-3 Working Days	$0.69952/EA	EA	EA
1/2	300#, 400#, 600#	-	1/8	GFEPDM-3460050-1/8	1-3 Working Days	$0.80303/EA	EA	EA
3/4	150#	-	1/8	GFEPDM-1500075-1/8	1-3 Working Days	$0.85745/EA	EA	EA
3/4	300#, 400#, 600#	-	1/8	GFEPDM-3460075-1/8	1-3 Working Days	$1.22149/EA	EA	EA
1	150#	-	1/8	GFEPDM-1500100-1/8	1-3 Working Days	$1.03144/EA	EA	EA
1	300#, 400#, 600#	-	1/8	GFEPDM-3460100-1/8	1-3 Working Days	$1.35711/EA	EA	EA
1 1/4	150#	-	1/8	GFEPDM-1500125-1/8	1-3 Working Days	$1.22149/EA	EA	EA
1 1/4	300#, 400#, 600#	-	1/8	GFEPDM-3460125-1/8	1-3 Working Days	$1.57393/EA	EA	EA
1 1/2	150#	-	1/8	GFEPDM-1500150-1/8	1-3 Working Days	$1.4276/EA	EA	EA
1 1/2	300#, 400#, 600#	-	1/8	GFEPDM-3460150-1/8	1-3 Working Days	$2.14229/EA	EA	EA
2	150#	-	1/8	GFEPDM-1500200-1/8	1-3 Working Days	$2.05575/EA	EA	EA
2	300#, 400#, 600#	-	1/8	GFEPDM-3460200-1/8	1-3 Working Days	$2.41265/EA	EA	EA
2 1/2	150#	-	1/8	GFEPDM-1500250-1/8	1-3 Working Days	$2.7981/EA	EA	EA
3	150#	-	1/8	GFEPDM-1500300-1/8	1-3 Working Days	$2.51258/EA	EA	EA
3	300#, 400#, 600#	-	1/8	GFEPDM-3460300-1/8	1-3 Working Days	$3.18712/EA	EA	EA
4	150#	-	1/8	GFEPDM-1500400-1/8	1-3 Working Days	$3.46907/EA	EA	EA
4	300#	-	1/8	GFEPDM-3000400-1/8	1-3 Working Days	$4.55405/EA	EA	EA
5	150#	-	1/8	GFEPDM-1500500-1/8	1-3 Working Days	$3.94353/EA	EA	EA
6	150#	-	1/8	GFEPDM-1500600-1/8	1-3 Working Days	$4.40326/EA	EA	EA
6	300#	-	1/8	GFEPDM-3000600-1/8	1-3 Working Days	$6.41618/EA	EA	EA
8	150#	-	1/8	GFEPDM-1500800-1/8	1-3 Working Days	$6.15921/EA	EA	EA
8	300#	-	1/8	GFEPDM-3000800-1/8	1-3 Working Days	$8.60041/EA	EA	EA
10	150#	-	1/8	GFEPDM-1501000-1/8	1-3 Working Days	$8.01955/EA	EA	EA
10	300#	-	1/8	GFEPDM-3001000-1/8	1-3 Working Days	$10.88903/EA	EA	EA
12	150#	-	1/8	GFEPDM-1501200-1/8	1-3 Working Days	$11.33159/EA	EA	EA
12	300#	-	1/8	GFEPDM-3001200-1/8	1-3 Working Days	$14.715/EA	EA	EA
14	150#	-	1/8	GFEPDM-1501400-1/8	1-3 Working Days	$13.99049/EA	EA	EA
14	300#	-	1/8	GFEPDM-3001400-1/8	1-3 Working Days	$19.01565/EA	EA	EA
16	150#	-	1/8	GFEPDM-1501600-1/8	1-3 Working Days	$16.91708/EA	EA	EA
16	300#	-	1/8	GFEPDM-3001600-1/8	1-3 Working Days	$22.51327/EA	EA	EA
18	150#	-	1/8	GFEPDM-1501800-1/8	1-3 Working Days	$17.18832/EA	EA	EA
18	300#	-	1/8	GFEPDM-3001800-1/8	1-3 Working Days	$26.26787/EA	EA	EA
20	150#	-	1/8	GFEPDM-1502000-1/8	1-3 Working Days	$20.34332/EA	EA	EA
20	300#	-	1/8	GFEPDM-3002000-1/8	1-3 Working Days	$30.27943/EA	EA	EA
24	150#	-	1/8	GFEPDM-1502400-1/8	1-3 Working Days	$25.58262/EA	EA	EA
24	300#	-	1/8	GFEPDM-3002400-1/8	1-3 Working Days	$41.11492/EA	EA	EA

EPDM Full Face Gasket

Technical Data

Tab 1

Governing StandardsEPDM Full Face Gasket

Tab 3

Physical PropertiesEPDM Full Face Gasket

Tab 4

Dimensional SpecificationsEPDM Full Face Gasket

Product Specification

Pipe Diameter

Flange Rating

Outside Diameter

Inside Diameter