skip to Main Navigation
skip to Main Content
skip to Footer
Toll Free
855.416.2658
LinkedIn
Facebook
Instagram
Shopping Cart (
0
)
Vedi Homepage
Menu
Products filter
Fasteners
Hex Bolts and Cap Screws
Studs & Threaded Rod
Stud Bolts
Threaded Rod
Single Pass Flange System
Socket Screws & Fasteners
Nuts
Hex Nuts
Lock Nuts
Coupling Nuts
Washers
Flat Washers
Square Washers
Lock Washers
Load Indicating Washers
Carriage Bolts
Plow Bolts
Lag Screws
Screws
Screws For Metal Building
Eyebolts
Rod Ends
Grating Fasteners
U-Bolt
Anchor Bolts
Duplex Split Drive Anchors
Wedge Anchors
Split Drive Anchors
Gages
View All
Fasteners
Gaskets
Spiral Wound Gaskets
Ring Gaskets
Full Face Gaskets
Metal Core Gaskets
View All
Gaskets
Pipe Supports
Pipe Clamps
Clevis Hangers
Pipe Rings
Beam Clamps
C-Clamps
U-Bolt
Structural Attachments
Rods
Rod Attachments
Standon Pipe Supports
View All
Pipe Supports
Cutting Tools
Drill Bits
Concrete Bits
Annular Cutters
Hole Cutters
Taps and Dies
Reamers
Bolt Removal and Thread Repair
View All
Cutting Tools
Services & Resources
Search
Search
Sign In
Create an Account
Home
>
Fasteners
>
Studs & Threaded Rod
>
Threaded Rod
>
A307 All Thread Rod, Galvanized
>
1/2-13 X 12 FT A307 ALL THREAD ROD, GALVANIZED DOMESTIC
Enlarge
1/2-13 X 12 FT A307 ALL THREAD ROD, GALVANIZED DOMESTIC
Item #:
RG2G0500000-U
1/2-13 X 12 FT A307 ALL THREAD ROD, GALVANIZED DOMESTIC
$3.37313/FT
Quantity
Price
Quantity
Price
1
$3.37313/ FT
25
$3.19603/ FT
70
$2.81606/ FT
500
$2.05108/ FT
Qty
5-7 Working Days
Add To Cart
Technical Data
Product Specification
Governing Standards
Mechanical Properties
Chemical Properties
Product Specification
Diameter
1/2
Length
12 FT
Grades
Grade A307
With Nut?
Bolt Only
Material
Steel
Finish
Hot Dipped Galvanized
Origin
Domestic
Weight
0.5916,
Governing Standards
Governing Standards
Grade A307A
ASTM A307
Covers the mechanical and material requirements for inch series fasteners in diameters from 1/4″ through 4″, made of carbon steel having a minimum tensile strength of 60,000 psi.
ASME B18.31.3
Covers the general and dimensional data for inch series threaded rods.
ASME B1.1 UNC & UNF Class 2A
Specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads.
Mechanical Properties
Mechanical Properties
Grade A307A
Low Carbon Steel
Per ASTM A307-2014
Diameter
Bolt or Stud Length
Tensile
Strength
Elongation
Core
Hardness (1)
Min psi
Min %
Rockwell
1/4 thru 4"
Less than 3 X dia (2)
60,000
18
B69 to B100
3 X dia and longer
60,000
18
B100
1. As measured anywhere on the surface or through the cross section.
2. Also bolts with drilled or undersized heads. These sizes and bolts with modified heads shall meet the minimum and maximum hardness as hardness is the only requirement.
Chemical Properties
Chemical Properties
Grade A307A
Per ASTM A307-2014
Carbon
Manganese
Phosphorus
Sulfur
% by heat
analysis
% by heat
analysis
% by heat
analysis
% by heat
analysis
0.29
1.20
0.04
0.15