Home > Fasteners > Screws > Self Drilling Screw > Hex Washer Head Tek Screw, Coated

Enlarge

Hex Washer Head Tek Screw, Coated

Hex head self drilling screws are fasteners that have a drill point which enables users to drill them directly into material without having to pre-drill a hole. In addition to the standard drill points, certain sizes available in a #1 stitch point for lap joints on metal roofing, or for thicker material up to 1/2" thick, a #5 point. These fasteners are available with a long life coating.

Products
Drill Point Specifications
Head Dimensions

Drill Point Specifications

#2 & #3 Standard Drill Point Self Drilling Screws

#2 & #3 Standard Drill Point for Self Drilling Screws dimensions

SAE J78-2013
Nominal Size or Basic Screw Diameter		Threads per Inch	T		t		P		Minimum Practical Nominal Screw Lengths, Formed Points				Minimum Torsional Strength, lb - in (STEEL SCREWS ONLY)
			Major Diameter		Minor Diameter		Protrusion Allowance		Minimum Practical Nominal Screw Lengths, Formed Points
			Max	Min	Max	Min	#2 Point	#3 Point	90° Head, #2 Point	Csk Head, #2 Point	90° Head, #3 Point	Csk Head, #3 Point
#4	0.112	24	0.114	0.110	0.086	0.082	0.163	-	5/16	3/8	-	-	14
#6	0.138	20	0.139	0.135	0.104	0.099	0.190	0.220	5/16	3/8	3/8	7/16	24
#8	0.164	18	0.166	0.161	0.122	0.116	0.211	0.251	3/8	7/16	7/16	1/2	42
#10	0.190	16	0.189	0.183	0.141	0.135	0.235	0.300	7/16	1/2	1/2	9/16	61
#12	0.216	14	0.215	0.209	0.164	0.157	0.283	0.353	1/2	5/8	1/2	5/8	92
#14	0.250	14	0.246	0.240	0.192	0.185	0.318	0.393	1/2	5/8	1/2	5/8	150

All dimensions are in inches.

	Steel	Stainless
Material	AISI 1016 - 1024 or equivalent steel	410 or 18-8 stainless steel
Heat Treatment	Screws shall be quenched in liquid and then tempered by reheating to 625°F minimum.	410 stainless steel screws shall be hardened and tempered by heating to 1800°-1900°F sufficient for austenitization, held for at least 1/2 hour and rapid air or oil-quenched then reheating to 500°-600°F for at least 1 hour and air cooled to provide the specified hardness.
Case Hardness	Rockwell C52 - 58	410 SS: Rockwell C55 minimum
Case Depth	No. 4 & 6 diameter: .002 - .007 No. 8 thru 12 diameter: .004 - .009 1/4 diameter & larger: .005 - .011	-
Core Hardness	Rockwell C32 - 40 (after tempering)	410 SS: Rockwell C38 - 42 (after tempering) 18-8 SS: Rockwell B90 - C25 (approx.)

#4 & #5 Drill Point Self Drilling Screws for Thicker Materials

Diameter & Thread Pitch	Point Size	T		t		A		B		Drilling Capacity		Performance Info (STEEL SCREWS ONLY)
		Major Thread Diameter		Minor Thread Diameter		Drill Point Length		Drill Point Diameter		Drilling Capacity		Steel Gauge	Shear Strength (lapped steel) (lbs)	Pullout Strength (lbs)
		Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Steel Gauge	Shear Strength (lapped steel) (lbs)	Pullout Strength (lbs)
10-24	#5	0.189	0.181	0.162	0.158	0.413	0.373	0.173	0.165	0.250	0.125	-	-	-
12-24	#4	0.216	0.207	0.172	0.168	0.523	0.495	0.202	0.190	0.312	0.145	12	2000	1500
12-24	#5	0.216	0.207	0.172	0.168	0.640	0.603	0.202	0.190	0.500	0.250	1/8	2700	2200
12-24	#5	0.216	0.207	0.172	0.168	0.640	0.603	0.202	0.190	0.500	0.250	1/4	2760	4000
1/4-20	#4	0.246	0.239	0.192	0.185	0.511	0.471	0.227	0.215	0.312	0.145	12	1800	-
1/4-20	#5	0.249	0.242	0.192	0.185	0.629	0.569	0.227	0.222	0.500	0.250	12	1800	-

All dimensions are in inches.

	Steel	Stainless
Material	AISI 1022 or equivalent steel	410 stainless steel
Heat Treatment	Screws shall be quenched in liquid and then tempered by reheating to 625°F minimum.	410 stainless steel screws shall be hardened and tempered by heating to 1800°-1900°F sufficient for austenitization, held for at least 1/2 hour and rapid air or oil-quenched then reheating to 500°-600°F for at least 1 hour and air cooled to provide the specified hardness.
Case Hardness	Rockwell C52 - 58	410 SS: Rockwell C55 minimum
Case Depth	No. 10 & 12 diameter: .004 - .009 1/4 diameter & larger: .005 - .011	-
Core Hardness	Rockwell C21 - 43 (after tempering)	Rockwell C38 - 42 (after tempering)
Shear Strength	The average ultimate values for shear strength are listed in the above table. Safety factors should be used when designing final applications.	-
Pullout Strength	The average ultimate values for pullout strength are listed in the above table. Safety factors should be used when designing final applications.	-

#1 Drill Point Self Drilling Stitch Screws

#1 Drill Point for Self Drilling Stitch Screws dimensions

Nominal Diameter	Threads per Inch	W		P
		Drill Point Width		Length of Drill Point
		Max	Min	Max	Min
#10	16	0.157	0.149	0.197	0.157
#12	14	0.183	0.173	0.236	0.197
#14	14	0.220	0.210	0.284	0.244

AISI 1016 - 1024 or equivalent steel
All dimensions are in inches.

Hex Washer Head Tek Screw, Coated

of 1

Sort By

View

Diameter Thread Pitch Length Tek Type Item # Availability Price Quantity UOM

#14

7/8

Stitch

DHHC 140087

In Stock

$0.13952/EA

See Quantity Discounts

14 X 7/8 HEX WASHER HEAD STITCH SCREW, COATED

$0.13952/EA

Qty

In Stock

Product Detail

Quantity	Price
Quantity	Price
1	$0.13952/ EA
760	$0.13161/ EA
3040	$0.11603/ EA
13640	$0.08172/ EA

#14

DHHC 140100

In Stock

$0.15613/EA

See Quantity Discounts

14 X 1 HEX WASHER HEAD #3 TEK, COATED

$0.15613/EA

Qty

In Stock

Product Detail

Quantity	Price
Quantity	Price
1	$0.15613/ EA
700	$0.14727/ EA
2800	$0.12984/ EA
12590	$0.09145/ EA

#14

1 1/2

DHHC 140150

In Stock

$0.22418/EA

See Quantity Discounts

14 X 1 1/2 HEX WASHER HEAD #3 TEK, COATED

$0.22418/EA

Qty

In Stock

Product Detail

Quantity	Price
Quantity	Price
1	$0.22418/ EA
530	$0.21147/ EA
2110	$0.18643/ EA
9480	$0.13132/ EA

#14

DHHC 140200

In Stock

$0.2599/EA

See Quantity Discounts

14 X 2 HEX WASHER HEAD #3 TEK, COATED

$0.2599/EA

Qty

In Stock

Product Detail

Quantity	Price
Quantity	Price
1	$0.2599/ EA
400	$0.24516/ EA
1600	$0.21614/ EA
7200	$0.15224/ EA

#14

DHHC 140300

In Stock

$0.39496/EA

See Quantity Discounts

14 X 3 HEX WASHER HEAD #3 TEK, COATED

$0.39496/EA

Qty

In Stock

Product Detail

Quantity	Price
Quantity	Price
1	$0.39496/ EA
310	$0.37256/ EA
1210	$0.32846/ EA
5410	$0.23135/ EA

1/4

2 1/4

DHHC 140225#5

In Stock

$1.01436/EA

See Quantity Discounts

1/4-20 X 2 1/4 HEX WASHER HEAD #5 TEK, COATED

$1.01436/EA

Qty

In Stock

Product Detail

Quantity	Price
Quantity	Price
1	$1.01436/ EA
40	$0.95684/ EA
160	$0.84357/ EA
690	$0.59417/ EA

1/4

DHHC 140300#5

In Stock

$0.59149/EA

See Quantity Discounts

14 X 3 HEX WASHER HEAD #5 TEK, COATED

$0.59149/EA

Qty

In Stock

Product Detail

Quantity	Price
Quantity	Price
1	$0.59149/ EA
250	$0.55794/ EA
1000	$0.49189/ EA
4500	$0.34647/ EA

1/4

DHHC 140600#5

In Stock

$1.27371/EA

See Quantity Discounts

1/4-20 X 6 HEX WASHER HEAD #5 TEK, COATED

$1.27371/EA

Qty

In Stock

Product Detail

Quantity	Price
Quantity	Price
1	$1.27371/ EA
100	$1.20147/ EA
370	$1.05924/ EA
1640	$0.74609/ EA

ASME B18.6.3-2013
Nominal Size	A		W	H		F		U
	Width Across Flats		Width Across Corners	Height of Head		Diameter of Washer		Thickness of Washer
	Max	Min	Min	Max	Min	Max	Min	Max	Min
#4	0.188	0.181	0.202	0.060	0.049	0.243	0.225	0.019	0.011
#6	0.250	0.244	0.272	0.093	0.080	0.328	0.302	0.025	0.015
#7	0.250	0.244	0.272	0.093	0.080	0.328	0.302	0.029	0.017
#8	0.250	0.244	0.272	0.110	0.096	0.348	0.322	0.031	0.019
#10	0.312	0.305	0.340	0.120	0.105	0.414	0.384	0.031	0.019
#12	0.312	0.305	0.340	0.155	0.139	0.432	0.398	0.039	0.022
#14	0.375	0.367	0.409	0.190	0.172	0.520	0.480	0.050	0.030

Hex Washer Head Tek Screw, Coated

Technical Data

Drill Point Specifications

#2 & #3 Standard Drill Point Self Drilling Screws

#4 & #5 Drill Point Self Drilling Screws for Thicker Materials

#1 Drill Point Self Drilling Stitch Screws

Head Dimensions

Dimensional SpecificationsHex & Hex Washer Heads for Self-Tapping & Self-Drilling Screws

You've Selected

Diameter

Thread Pitch

Length

Thread Type

Width Across Flats

Point Type

14 X 7/8 HEX WASHER HEAD STITCH SCREW, COATED

14 X 1 HEX WASHER HEAD #3 TEK, COATED

14 X 1 1/2 HEX WASHER HEAD #3 TEK, COATED

14 X 2 HEX WASHER HEAD #3 TEK, COATED

14 X 3 HEX WASHER HEAD #3 TEK, COATED

1/4-20 X 2 1/4 HEX WASHER HEAD #5 TEK, COATED

14 X 3 HEX WASHER HEAD #5 TEK, COATED

1/4-20 X 6 HEX WASHER HEAD #5 TEK, COATED