Hex Washer Head Tek Screw, Plated

Hex head self drilling screws are fasteners that have a drill point which enables users to drill them directly into material without having to pre-drill a hole. Certain sizes available in a #5 point for thicker material. These fasteners are available in a zinc plated finish.

Technical Data

Dimensional Specifications & Product Details#2 & #3 Standard Drill Point for Self Drilling Screws

#2 & #3 Standard Drill Point for Self Drilling Screws dimensions

SAE J78-2013
Nominal Size or Basic Screw Diameter		Threads per Inch	T		t		P		Minimum Practical Nominal Screw Lengths, Formed Points				Minimum Torsional Strength, lb - in (STEEL SCREWS ONLY)
			Major Diameter		Minor Diameter		Protrusion Allowance		Minimum Practical Nominal Screw Lengths, Formed Points
			Max	Min	Max	Min	#2 Point	#3 Point	90° Head, #2 Point	Csk Head, #2 Point	90° Head, #3 Point	Csk Head, #3 Point
4	0.112	24	0.114	0.110	0.086	0.082	0.163	-	5/16	3/8	-	-	14
6	0.138	20	0.139	0.135	0.104	0.099	0.190	0.220	5/16	3/8	3/8	7/16	24
8	0.164	18	0.166	0.161	0.122	0.116	0.211	0.251	3/8	7/16	7/16	1/2	42
10	0.190	16	0.189	0.183	0.141	0.135	0.235	0.300	7/16	1/2	1/2	9/16	61
12	0.216	14	0.215	0.209	0.164	0.157	0.283	0.353	1/2	5/8	1/2	5/8	92
1/4	0.250	14	0.246	0.240	0.192	0.185	0.318	0.393	1/2	5/8	1/2	5/8	150

All dimensions are in inches.

	Steel	Stainless
Material	AISI 1016 - 1024 or equivalent steel	410 or 18-8 stainless steel
Heat Treatment	Screws shall be quenched in liquid and then tempered by reheating to 625°F minimum.	410 stainless steel screws shall be hardened and tempered by heating to 1800°-1900°F sufficient for austenitization, held for at least 1/2 hour and rapid air or oil-quenched then reheating to 500°-600°F for at least 1 hour and air cooled to provide the specified hardness.
Case Hardness	Rockwell C52 - 58	410 SS: Rockwell C55 minimum
Case Depth	No. 4 & 6 diameter: .002 - .007 No. 8 thru 12 diameter: .004 - .009 1/4 diameter & larger: .005 - .011	-
Core Hardness	Rockwell C32 - 40 (after tempering)	410 SS: Rockwell C38 - 42 (after tempering) 18-8 SS: Rockwell B90 - C25 (approx.)

Dimensional Specifications & Product Details#4 & #5 Drill Point Self Drilling Screws for Thicker Materials

#4 & #5 Drill Point Self Drilling Screws for Thicker Materials dimensions

Diameter & Thread Pitch	Point Size	T		t		A		B		Drilling Capacity		Performance Info (STEEL SCREWS ONLY)
		Major Thread Diameter		Minor Thread Diameter		Drill Point Length		Drill Point Diameter		Drilling Capacity		Steel Gauge	Shear Strength (lapped steel) (lbs)	Pullout Strength (lbs)
		Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Steel Gauge	Shear Strength (lapped steel) (lbs)	Pullout Strength (lbs)
10-24	#5	0.189	0.181	0.162	0.158	0.413	0.373	0.173	0.165	0.250	0.125	-	-	-
12-24	#4	0.216	0.207	0.172	0.168	0.523	0.495	0.202	0.190	0.312	0.145	12	2000	1500
12-24	#5	0.216	0.207	0.172	0.168	0.640	0.603	0.202	0.190	0.500	0.250	1/8	2700	2200
12-24	#5	0.216	0.207	0.172	0.168	0.640	0.603	0.202	0.190	0.500	0.250	1/4	2760	4000
1/4-20	#4	0.246	0.239	0.192	0.185	0.511	0.471	0.227	0.215	0.312	0.145	12	1800	-
1/4-20	#5	0.249	0.242	0.192	0.185	0.629	0.569	0.227	0.222	0.500	0.250	12	1800	-

All dimensions are in inches.

	Steel	Stainless
Material	AISI 1022 or equivalent steel	410 stainless steel
Heat Treatment	Screws shall be quenched in liquid and then tempered by reheating to 625°F minimum.	410 stainless steel screws shall be hardened and tempered by heating to 1800°-1900°F sufficient for austenitization, held for at least 1/2 hour and rapid air or oil-quenched then reheating to 500°-600°F for at least 1 hour and air cooled to provide the specified hardness.
Case Hardness	Rockwell C52 - 58	410 SS: Rockwell C55 minimum
Case Depth	No. 10 & 12 diameter: .004 - .009 1/4 diameter & larger: .005 - .011	-
Core Hardness	Rockwell C21 - 43 (after tempering)	Rockwell C38 - 42 (after tempering)
Shear Strength	The average ultimate values for shear strength are listed in the above table. Safety factors should be used when designing final applications.	-
Pullout Strength	The average ultimate values for pullout strength are listed in the above table. Safety factors should be used when designing final applications.	-

Dimensional SpecificationsHex & Hex Washer Heads for Self-Tapping & Self-Drilling Screws

Hex & Hex Washer Heads for Self-Tapping & Self-Drilling Screws dimensions

ASME B18.6.3-2013
Nominal Size	A		W	H		F		U
	Width Across Flats		Width Across Corners	Height of Head		Diameter of Washer		Thickness of Washer
	Max	Min	Min	Max	Min	Max	Min	Max	Min
4	0.188	0.181	0.202	0.060	0.049	0.243	0.225	0.019	0.011
6	0.250	0.244	0.272	0.093	0.080	0.328	0.302	0.025	0.015
7	0.250	0.244	0.272	0.093	0.080	0.328	0.302	0.029	0.017
8	0.250	0.244	0.272	0.110	0.096	0.348	0.322	0.031	0.019
10	0.312	0.305	0.340	0.120	0.105	0.414	0.384	0.031	0.019
12	0.312	0.305	0.340	0.155	0.139	0.432	0.398	0.039	0.022
14	0.375	0.367	0.409	0.190	0.172	0.520	0.480	0.050	0.030
1/4	0.375	0.367	0.409	0.190	0.172	0.520	0.480	0.050	0.030
5/16	0.500	0.489	0.545	0.230	0.208	0.676	0.624	0.055	0.035
3/8	0.562	0.551	0.614	0.295	0.270	0.780	0.720	0.063	0.037
1/2	0.750	0.735	0.820	0.400	0.367	1.040	0.960	0.085	0.050

All dimensions are in inches.

Hex Washer Head Tek Screw, Plated

of 1

Sort By

Show

View

Diameter	Length	Tek Type	Item #	Availability	Price	Quantity
#6	1/2	#2	DHHP 60050	In Stock	$0.01684/EA	EA	EA
#6	3/4	#2	DHHP 60075	In Stock	$0.01891/EA	EA	EA
#6	1	#2	DHHP 60100	In Stock	$0.02409/EA	EA	EA
#6	1 1/2	#2	DHHP 60150	In Stock	$0.02802/EA	EA	EA
#8	1/2	#2	DHHP 80050	In Stock	$0.01684/EA	EA	EA
#8	3/4	#2	DHHP 80075	In Stock	$0.02133/EA	EA	EA
#8	1	#2	DHHP 80100	In Stock	$0.02608/EA	EA	EA
#8	1 1/4	#2	DHHP 80125	In Stock	$0.03294/EA	EA	EA
#8	1 1/2	#2	DHHP 80150	In Stock	$0.03618/EA	EA	EA
#8	2	#2	DHHP 80200	In Stock	$0.05307/EA	EA	EA
#8	3	#2	DHHP 80300	3-5 Working Days	$0.08433/EA	EA	EA
#10	1/2	#3	DHHP 100050	In Stock	$0.0304/EA	EA	EA
#10	3/4	#3	DHHP 100075	In Stock	$0.04257/EA	EA	EA
#10	1	#3	DHHP 100100	In Stock	$0.05212/EA	EA	EA
#10	1 1/4	#3	DHHP 100125	In Stock	$0.05604/EA	EA	EA
#10	1 1/2	#3	DHHP 100150	In Stock	$0.04845/EA	EA	EA
#10	1 3/4	#3	DHHP 100175	3-5 Working Days	$0.04007/EA	EA	EA
#10	2	#3	DHHP 100200	In Stock	$0.05972/EA	EA	EA
#10	2 1/2	#3	DHHP 100250	In Stock	$0.08096/EA	EA	EA
#10	3	#3	DHHP 100300	In Stock	$0.10574/EA	EA	EA
#12	3/4	#3	DHHP 120075	In Stock	$0.04318/EA	EA	EA
#12	1	#3	DHHP 120100	In Stock	$0.06736/EA	EA	EA
#12	1 1/4	#3	DHHP 120125	In Stock	$0.06187/EA	EA	EA
#12	1 1/2	#3	DHHP 120150	In Stock	$0.0804/EA	EA	EA
#12	1 1/2	#5	DHHP 120150#5	In Stock	$0.23217/EA	EA	EA
#12	2	#3	DHHP 120200	In Stock	$0.09115/EA	EA	EA
#12	2 1/2	#3	DHHP 120250	In Stock	$0.13877/EA	EA	EA
#12	3	#3	DHHP 120300	In Stock	$0.12284/EA	EA	EA
#14	3/4	#3	DHHP 140075	In Stock	$0.06369/EA	EA	EA
#14	1	#3	DHHP 140100	In Stock	$0.09115/EA	EA	EA
#14	1 1/4	#3	DHHP 140125	In Stock	$0.08705/EA	EA	EA
#14	1 1/2	#3	DHHP 140150	In Stock	$0.11926/EA	EA	EA
#14	2	#3	DHHP 140200	In Stock	$0.15989/EA	EA	EA
#14	2 1/2	#3	DHHP 140250	In Stock	$0.15717/EA	EA	EA
#14	3	#3	DHHP 140300	In Stock	$0.20915/EA	EA	EA
#14	3 1/2	#3	DHHP 140350	In Stock	$0.27811/EA	EA	EA
#14	4	#3	DHHP 140400	In Stock	$0.31416/EA	EA	EA
#14	6	#3	DHHP 140600	In Stock	$0.83135/EA	EA	EA

Hex Washer Head Tek Screw, Plated

Technical Data

Tab 1

Dimensional Specifications & Product Details#2 & #3 Standard Drill Point for Self Drilling Screws

Tab 2

Dimensional Specifications & Product Details#4 & #5 Drill Point Self Drilling Screws for Thicker Materials

Tab 3

Dimensional SpecificationsHex & Hex Washer Heads for Self-Tapping & Self-Drilling Screws

Product Specification

Diameter

Thread Pitch

Length

Thread Type

Width Across Flats

Point Type

Drive Size

Tek Type