Home > Fasteners > Eyebolts > Lifting Eye Bolt

Enlarge

Lifting Eye Bolt

ASTM A489 Type 1 Lifting Eye Bolts are forged, carbon steel threaded eye bolts intended for use with tapped holes that have been engineered as a lifting point. Dimensional specifications are governed by ASME B18.15 in sizes 1/4" through 2-1/2". According to ASME B30.26 - Rigging Hardware, each eye bolt shall be marked to show: 1. Name or trademark of manufacturer, 2. Size or rated load and 3. Grade for alloy eye bolts.

Products
Governing Standards
Mechanical Properties
Chemical Properties
Dimensional Specifications
Load Ratings

Dimensional Specifications

Dimensional SpecificationsShoulder Lifting Eye Bolt

Per ASME B18.15-1985 (R1995)
Nominal Diameter	UNC	A	B		C		D	E		F		G		H		J
		Shank Diameter	Shank Length		Eye Inside Diameter		Eye Outside Diameter	Overall Length		Eye Section Diameter		Shoulder Diameter		Shoulder Thickness		Eye to Shoulder
		Shank Diameter	Min	Max	Min	Max	Eye Outside Diameter	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
1/4	20	0.25	1.00	1.06	0.69	0.81	1.19	2.22	2.53	0.19	0.25	0.50	0.56	0.12	0.19	0.69	0.81
5/16	18	0.31	1.12	1.19	0.81	0.94	1.44	2.66	2.97	0.25	0.31	0.56	0.62	0.12	0.19	0.88	1.00
3/8	16	0.38	1.25	1.38	0.94	1.06	1.69	3.09	3.47	0.31	0.38	0.62	0.69	0.12	0.19	1.06	1.19
7/16	14	0.44	1.38	1.50	1.00	1.12	1.81	3.41	3.78	0.34	0.41	0.75	0.81	0.19	0.25	1.19	1.31
1/2	13	0.50	1.50	1.62	1.12	1.25	2.12	3.81	4.19	0.44	0.50	0.88	0.94	0.19	0.25	1.31	1.44
9/16	12	0.56	1.62	1.75	1.19	1.31	2.25	4.19	4.56	0.47	0.53	0.94	1.00	0.22	0.28	1.50	1.62
5/8	11	0.62	1.75	1.88	1.31	1.44	2.56	4.56	4.94	0.56	0.62	1.00	1.06	0.25	0.31	1.59	1.72
3/4	10	0.75	2.00	2.12	1.44	1.56	2.81	5.06	5.50	0.62	0.69	1.12	1.25	0.25	0.31	1.72	1.91
7/8	9	0.88	2.25	2.38	1.56	1.69	3.19	5.75	6.19	0.75	0.81	1.31	1.44	0.31	0.38	2.03	2.22
1	8	1.00	2.50	2.62	1.69	1.81	3.56	6.44	6.88	0.88	0.94	1.50	1.62	0.38	0.44	2.22	2.41
1 1/8	7	1.12	2.75	2.88	1.94	2.06	4.06	7.31	7.75	1.00	1.06	1.69	1.81	0.44	0.50	2.59	2.78
1 1/4	7	1.25	3.00	3.12	2.12	2.25	4.44	8.00	8.44	1.09	1.16	1.88	2.00	0.50	0.56	2.84	3.03
1 1/2	6	1.50	3.50	3.62	2.44	2.56	5.19	9.22	9.72	1.31	1.38	2.12	2.25	0.50	0.62	3.19	3.44
1 3/4	5	1.75	3.75	3.88	2.75	3.00	6.00	10.50	11.12	1.50	1.62	2.50	2.62	0.50	0.62	3.88	4.12
2	4.5	2.00	4.00	4.12/4.25	3.06	3.44	6.88	11.53	12.22	1.75	1.88	2.88	3.00	0.62	0.75	4.25	4.50
2 1/2	4	2.50	5.00	5.25	3.81	4.19	8.50	14.59	15.40	2.19	2.31	3.62	3.75	0.88	1.00	5.50	5.75

All dimensions are in inches.

Load Ratings

Load RatingsLifting Eye Bolt

Weldless Forged, Quenched and Tempered Carbon Steel				Per ASTM A489-12
Nominal Thread Size	Thread Pitch	Tensile Stress AreaA	Breaking Strength	Proof LoadB	*Rated Capacity lbs
Nominal Thread Size	Thread Pitch	Tensile Stress AreaA	Min	Min
Inch Pound Units
in.		in.2	lbf	lbf
1/4	20	0.0318	2 100	800	500
5/16	18	0.0524	3 400	1 360	900
3/8	16	0.0775	5 000	2 000	1,300
7/16	14	0.1063	6 900	2 760	1,800
1/2	13	0.1419	9 200	3 680	2,400
9/16	12	0.1820	11 830	4 740	3,000
5/8	11	0.2260	14 700	5 880	4,000
3/4	10	0.3340	21 700	8 680	5,000
7/8	9	0.4620	30 000	12 000	7,000
1	8	0.6060	39 400	15 760	9,000
1 1/8	7	0.7630	49 600	19 840	12,000
1 1/4	7	0.9690	63 000	25 200	15,000
1 1/2	6	1.4100	91 600	36 520	21,000
1 3/4	5	1.9000	123 500	49 400	28,000
2	4	2.5000	162 500	65 000	38,000
2 1/2	4	4.0000	260 000	104 000	56,000

^AThe stress area is calculated as follows: As=0.7854 [D - (0.9743/n)]²
Where:
As = stress area, in.²,
D = nominal bolt size, and
n = threads per inch.
^BProof load is calculated as 2 times the rated capacity in straight pull (0 degrees) specified in ASME B18.15.
*NOTE: Rated capacity is for zero degree vertical pulls. Please Shoulder Eyebolt Rated Capacity/Guidelines for complete lifting information. Swivel Hoist Rings are recommended for angular lifts. Per ASME B18.15-1985 (R1995).

Lifting Eye Bolt

of 1

Sort By

View

Diameter Length Overall Length Item # Availability Price Quantity UOM

7/16

1 3/8

3.0600

EYEB043

In Stock

$10.10477/EA

See Quantity Discounts

7/16-14 LIFTING EYE BOLT

$10.10477/EA

Qty

In Stock

Product Detail

Quantity	Price
Quantity	Price
1	$10.10477/EA
50	$9.57424/EA
200	$8.43598/EA
860	$6.14436/EA

9/16

1 5/8

3.7500

EYEB056

Out Of Stock

$11.85759/EA

See Quantity Discounts

9/16-12 LIFTING EYE BOLT

$11.85759/EA

Qty

Out Of Stock

Product Detail

Quantity	Price
Quantity	Price
1	$11.85759/EA
25	$11.23504/EA
80	$9.89933/EA
500	$7.2102/EA

ASTM A489	Covers weldless forged, quenched, and tempered carbon steel threaded lifting eyes (formerly eyebolts) for overhead lifting.
ASME B18.15	Covers dimensions and capacities for carbon and stainless steel forged threaded eyebolts in sizes ¼ through 2-1/2 inch for steel and ¼ through 1-1/2” for corrosion resistant stainless steel intended primarily for lifting applications.
ASME B1.1 UNC Class 2A	Specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads.

Weldless Forged, Quenched and Tempered Carbon Steel				Per ASTM A489-12
Tensile Strength	Tensile Strength	Yield Point	Yield Point	Elongation in 4D	Reduction of Area
psi	(MPa)	Min psi	Min (MPa)	Min %	Min %
65 000-90 000	(448-620)	30 000	-207	30	60

Per ASTM A489-12
Analysis Type	Carbon	Manganese	Phosphorus	Sulfur	Silicon
Analysis Type	Max	Max	Max	Max	% by weight
Heat Analysis	0.48	1.00	0.040	0.050	0.15 - 0.35
Product Analysis	0.51	1.06	0.048	0.058	0.12 - 0.38

Lifting Eye Bolt

Technical Data

Governing Standards

Governing StandardsLifting Eye Bolt

Mechanical Properties

Mechanical PropertiesLifting Eye Bolt

Chemical Properties

Chemical PropertiesLifting Eye Bolt

Dimensional Specifications

Dimensional SpecificationsShoulder Lifting Eye Bolt

Load Ratings

Load RatingsLifting Eye Bolt

You've Selected

Diameter

Thread Pitch

Length

Overall Length

7/16-14 LIFTING EYE BOLT

9/16-12 LIFTING EYE BOLT