1-8 SHOULDER LIFTING EYE BOLT

Name: 1-8 SHOULDER LIFTING EYE BOLT
Price: 39.94794 USD
Availability: InStock

$39.94794/EA

Qty

In Stock

Dimensional SpecificationsShoulder Lifting Eye Bolt

Weldless Forged, Quenched and Tempered Carbon Steel				Per ASTM A489-12
Nominal Thread Size	Thread Pitch	Tensile Stress AreaA	Breaking Strength	Proof LoadB	*Rated Capacity lbs
Nominal Thread Size	Thread Pitch	Tensile Stress AreaA	Min	Min
Inch Pound Units
in.		in.2	lbf	lbf
1/4	20	0.0318	2 100	800	500
5/16	18	0.0524	3 400	1 360	900
3/8	16	0.0775	5 000	2 000	1,300
7/16	14	0.1063	6 900	2 760	1,800
1/2	13	0.1419	9 200	3 680	2,400
9/16	12	0.1820	11 830	4 740	3,000
5/8	11	0.2260	14 700	5 880	4,000
3/4	10	0.3340	21 700	8 680	5,000
7/8	9	0.4620	30 000	12 000	7,000
1	8	0.6060	39 400	15 760	9,000
1 1/8	7	0.7630	49 600	19 840	12,000
1 1/4	7	0.9690	63 000	25 200	15,000
1 1/2	6	1.4100	91 600	36 520	21,000
1 3/4	5	1.9000	123 500	49 400	28,000
2	4	2.5000	162 500	65 000	38,000
2 1/2	4	4.0000	260 000	104 000	56,000

^AThe stress area is calculated as follows: As=0.7854 [D - (0.9743/n)]²
Where:
As = stress area, in.²,
D = nominal bolt size, and
n = threads per inch.
^BProof load is calculated as 2 times the rated capacity in straight pull (0 degrees) specified in ASME B18.15.
*NOTE: Rated capacity is for zero degree vertical pulls. Please Shoulder Eyebolt Rated Capacity/Guidelines for complete lifting information. Swivel Hoist Rings are recommended for angular lifts. Per ASME B18.15-1985 (R1995).

ASTM A489	Covers weldless forged, quenched, and tempered carbon steel threaded lifting eyes (formerly eyebolts) for overhead lifting.
ASME B18.15	Covers dimensions and capacities for carbon and stainless steel forged threaded eyebolts in sizes ¼ through 2-1/2 inch for steel and ¼ through 1-1/2” for corrosion resistant stainless steel intended primarily for lifting applications.
ASME B1.1 UNC Class 2A	Specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads.

Weldless Forged, Quenched and Tempered Carbon Steel				Per ASTM A489-12
Tensile Strength	Tensile Strength	Yield Point	Yield Point	Elongation in 4D	Reduction of Area
psi	(MPa)	Min psi	Min (MPa)	Min %	Min %
65 000-90 000	(448-620)	30 000	-207	30	60